committing changes in /etc after apt run

Package changes:
+connman 1.36-1 armhf

.etckeeper

@@ -98,6 +98,9 @@ maybe chmod 0644 'apparmor.d/local/usr.bin.man'
 maybe chmod 0644 'apparmor.d/local/usr.sbin.named'
 maybe chmod 0644 'apparmor.d/usr.bin.man'
 maybe chmod 0644 'apparmor.d/usr.sbin.named'
+maybe chmod 0755 'apport'
+maybe chmod 0755 'apport/crashdb.conf.d'
+maybe chmod 0644 'apport/crashdb.conf.d/connman-crashdb.conf'
 maybe chmod 0755 'apt'
 maybe chmod 0755 'apt/apt.conf.d'
 maybe chmod 0644 'apt/apt.conf.d/01autoremove'
@@ -172,6 +175,8 @@ maybe chmod 0644 'chromium.d/apikeys'
 maybe chmod 0644 'chromium.d/default-flags'
 maybe chmod 0644 'chromium.d/extensions'
 maybe chmod 0755 'cifs-utils'
+maybe chmod 0755 'connman'
+maybe chmod 0644 'connman/main.conf'
 maybe chmod 0755 'console-setup'
 maybe chmod 0644 'console-setup/cached_Lat15-Fixed16.psf.gz'
 maybe chmod 0644 'console-setup/cached_UTF-8_del.kmap.gz'
@@ -743,6 +748,7 @@ maybe chmod 0755 'init.d/alsa-utils'
 maybe chmod 0755 'init.d/avahi-daemon'
 maybe chmod 0755 'init.d/bind9'
 maybe chmod 0755 'init.d/bluetooth'
+maybe chmod 0755 'init.d/connman'
 maybe chmod 0755 'init.d/console-setup.sh'
 maybe chmod 0755 'init.d/cron'
 maybe chmod 0755 'init.d/dbus'

apport/crashdb.conf.d/connman-crashdb.conf

@@ -0,0 +1,5 @@
+connman = {
+ 'impl' : 'launchpad',
+ 'project' : 'connman',
+ 'bug_pattern_url' : None,
+ }

connman/main.conf

@@ -0,0 +1,134 @@
+[General]
+
+# Set input request timeout. Default is 120 seconds
+# The request for inputs like passphrase will timeout
+# after certain amount of time. Use this setting to
+# increase the value in case of different user
+# interface designs.
+# InputRequestTimeout = 120
+
+# Set browser launch timeout. Default is 300 seconds
+# The request for launching a browser for portal pages
+# will timeout after certain amount of time. Use this
+# setting to increase the value in case of different
+# user interface designs.
+# BrowserLaunchTimeout = 300
+
+# If wifi is disconnected, the background scanning will follow a simple
+# backoff mechanism from 3s up to 5 minutes. Then, it will stay in 5
+# minutes unless user specifically asks for scanning through a D-Bus
+# call. If so, the mechanism will start again from 3s. This feature
+# activates also the background scanning while being connected, which
+# is required for roaming on wifi.
+# When BackgroundScanning is false, ConnMan will not perform any scan
+# regardless of wifi is connected or not, unless it is requested by
+# the user through a D-Bus call.
+# BackgroundScanning = true
+
+# List of Fallback timeservers separated by ",".
+# These timeservers are used for NTP sync when there are
+# no timeserver set by the user or by the service.
+# These can contain mixed combination of fully qualified
+# domain names, IPv4 and IPv6 addresses.
+# FallbackTimeservers =
+
+# List of fallback nameservers separated by "," used if no
+# nameservers are otherwise provided by the service. The
+# nameserver entries must be in numeric format, host
+# names are ignored.
+# FallbackNameservers =
+
+# List of technologies that are marked autoconnectable
+# by default, separated by commas ",". The default value
+# for this entry when empty is ethernet,wifi,cellular.
+# Services that are automatically connected must have been
+# set up and saved to storage beforehand.
+# DefaultAutoConnectTechnologies =
+
+# List of preferred technologies from the most preferred
+# one to the least preferred one separated by commas ",".
+# Services of the listed technology type will be tried one
+# by one in the order given, until one of them gets connected
+# or they are all tried. A service of a preferred technology
+# type in state 'ready' will get the default route when
+# compared to another preferred type further down the list
+# with state 'ready' or with a non-preferred type; a service
+# of a preferred technology type in state 'online' will get
+# the default route when compared to either a non-preferred
+# type or a preferred type further down in the list.
+# PreferredTechnologies =
+
+# List of blacklisted network interfaces separated by ",".
+# Found interfaces will be compared to the list and will
+# not be handled by connman, if their first characters
+# match any of the list entries. Default value is
+# vmnet,vboxnet,virbr,ifb,ve-,vb-.
+# NetworkInterfaceBlacklist = vmnet,vboxnet,virbr,ifb,ve-,vb-
+
+# Allow connman to change the system hostname. This can
+# happen for example if we receive DHCP hostname option.
+# Default value is true.
+# AllowHostnameUpdates = true
+
+# Allow connman to change the system domainname. This can
+# happen for example if we receive DHCP domainname option.
+# Default value is true.
+# AllowDomainnameUpdates = true
+
+# Keep only a single connected technology at any time. When a new
+# service is connected by the user or a better one is found according
+# to PreferredTechnologies, the new service is kept connected and all
+# the other previously connected services are disconnected. With this
+# setting it does not matter whether the previously connected services
+# are in 'online' or 'ready' states, the newly connected service is
+# the only one that will be kept connected. A service connected by the
+# user will be used until going out of network coverage. With this
+# setting enabled applications will notice more network breaks than
+# normal. Default value is false.
+# SingleConnectedTechnology = false
+
+# List of technologies for which tethering is allowed separated by ",".
+# The default value is wifi,bluetooth,gadget. Only those technologies
+# listed here are used for tethering. If ethernet tethering is desired,
+# then ethernet should be added to the list. The technologies listed here
+# have to support tethering, currently tethering is implemented for wifi,
+# bluetooth, gadget and ethernet.
+# NOTE that if ethernet tethering is enabled, then a DHCP server is
+# started on all ethernet interfaces. Tethered ethernet should
+# never be connected to corporate or home network as it will disrupt
+# normal operation of these networks. Due to this ethernet is not
+# tethered by default. Do not activate ethernet tethering unless you
+# really know what you are doing.
+# TetheringTechnologies = wifi,bluetooth,gadget
+
+# Restore earlier tethering status when returning from offline mode,
+# re-enabling a technology, and after restarts and reboots.
+# Default value is false.
+# PersistentTetheringMode = false
+
+# Automatically enable Anycast 6to4 if possible. This is not recommended, as
+# the use of 6to4 will generally lead to a severe degradation of connection
+# quality. See RFC6343. Default value is false (as recommended by RFC6343
+# section 4.1).
+# Enable6to4 = false
+
+# Enable use of http get as on online status check.
+# When a service is in a READY state, and is selected as default,
+# ConnMan will issue an HTTP GET request to verify that end-to-end
+# connectivity is successful. Only then the service will be
+# transitioned to ONLINE state.
+# If this setting is false, the default service will remain in READY state.
+# Default value is true.
+# EnableOnlineCheck = false
+
+# List of technologies with AutoConnect = true which are always connected
+# regardless of PreferredTechnologies setting. Default value is empty and
+# will connect a technology only if it is at a higher preference than any
+# other which is already connected.
+# This setting has no effect if SingleConnectedTechnologies is enabled.
+# AlwaysConnectedTechnologies =
+
+# Enable auto connection of services in roaming.
+# If this setting is false, roaming services are not auto-connected by Connman.
+# Default value is false.
+# AutoConnectRoamingServices = false

init.d/connman

@@ -0,0 +1,78 @@
+#!/bin/sh
+
+### BEGIN INIT INFO
+# Provides:       connman
+# Required-Start: $remote_fs $syslog dbus
+# Required-Stop:  $remote_fs $syslog dbus
+# Default-Start:  2 3 4 5
+# Default-Stop:   0 1 6
+# Short-Description: Connection Manager
+### END INIT INFO
+
+
+DAEMON=/usr/sbin/connmand
+DESC="Connection Manager"
+NAME=connmand
+. /lib/lsb/init-functions
+
+if [ -f /etc/default/connman ] ; then
+	. /etc/default/connman
+fi
+
+if [ "CONNMAN_RUNSTATEDIR_RESOLVCONF" != "no" ] ; then
+    mkdir -p /run/connman
+    ln -sf /run/connman/resolv.conf /etc/
+fi
+
+do_start() {
+	start-stop-daemon --start --oknodo --exec $DAEMON -- $DAEMON_OPTS
+}
+
+do_stop() {
+	start-stop-daemon --stop --oknodo --quiet --exec $DAEMON
+}
+
+get_pid() {
+	[ -n "$1" ] || return 0
+	[ -S /run/dbus/system_bus_socket ] || return 0
+
+	dbus-send --system --dest=org.freedesktop.DBus --print-reply \
+		/org/freedesktop/DBus org.freedesktop.DBus.GetConnectionUnixProcessID \
+		string:$1 2>/dev/null | awk '/uint32/ {print $2}'
+}
+
+case "$1" in
+  start)
+	log_daemon_msg "Starting $DESC"
+	do_start
+	log_end_msg $?
+	;;
+  stop)
+	log_daemon_msg "Stopping $DESC"
+	do_stop
+	log_end_msg $?
+	;;
+  restart|force-reload)
+	log_daemon_msg "Restarting $DESC"
+	do_stop
+	sleep 1
+	do_start
+	log_end_msg $?
+	;;
+  status)
+	pid=$(get_pid net.connman)
+	if [ -n "$pid" ]; then
+		log_success_msg "$NAME is running"
+		return 0
+	else
+		log_failure_msg "$NAME is not running"
+		return 3 # LSB exit code for "program is not running"
+	fi
+	;;
+  *)
+	log_success_msg "Usage: $0 {start|stop|status|restart|force-reload}" >&2
+	exit 1
+	;;
+esac
+
+exit 0

rc0.d/K01connman

@@ -0,0 +1 @@
+../init.d/connman

rc1.d/K01connman

@@ -0,0 +1 @@
+../init.d/connman

rc2.d/S01connman

@@ -0,0 +1 @@
+../init.d/connman

rc3.d/S01connman

@@ -0,0 +1 @@
+../init.d/connman

rc4.d/S01connman

@@ -0,0 +1 @@
+../init.d/connman

rc5.d/S01connman

@@ -0,0 +1 @@
+../init.d/connman

rc6.d/K01connman

@@ -0,0 +1 @@
+../init.d/connman

systemd/system/dundee.service

@@ -1 +0,0 @@
-/dev/null

systemd/system/multi-user.target.wants/connman.service

@@ -0,0 +1 @@
+/lib/systemd/system/connman.service

systemd/system/network-online.target.wants/connman-wait-online.service

@@ -0,0 +1 @@
+/lib/systemd/system/connman-wait-online.service

systemd/system/ofono.service

@@ -1 +0,0 @@
-/dev/null