You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
206 lines
7.2 KiB
Plaintext
206 lines
7.2 KiB
Plaintext
[General]
|
|
|
|
# Defaults to 'BlueZ X.YZ', if Name is not set here and plugin 'hostname' is not loaded.
|
|
# The plugin 'hostname' is loaded by default and overides the Name set here so
|
|
# consider modifying /etc/machine-info with variable PRETTY_HOSTNAME=<NewName> instead.
|
|
#Name = BlueZ
|
|
|
|
# Default device class. Only the major and minor device class bits are
|
|
# considered. Defaults to '0x000000'.
|
|
#Class = 0x000100
|
|
|
|
# How long to stay in discoverable mode before going back to non-discoverable
|
|
# The value is in seconds. Default is 180, i.e. 3 minutes.
|
|
# 0 = disable timer, i.e. stay discoverable forever
|
|
#DiscoverableTimeout = 0
|
|
|
|
# Always allow pairing even if there are no agent registered
|
|
# Possible values: true, false
|
|
# Default: false
|
|
#AlwaysPairable = false
|
|
|
|
# How long to stay in pairable mode before going back to non-discoverable
|
|
# The value is in seconds. Default is 0.
|
|
# 0 = disable timer, i.e. stay pairable forever
|
|
#PairableTimeout = 0
|
|
|
|
# Use vendor id source (assigner), vendor, product and version information for
|
|
# DID profile support. The values are separated by ":" and assigner, VID, PID
|
|
# and version.
|
|
# Possible vendor id source values: bluetooth, usb (defaults to usb)
|
|
#DeviceID = bluetooth:1234:5678:abcd
|
|
|
|
# Do reverse service discovery for previously unknown devices that connect to
|
|
# us. For BR/EDR this option is really only needed for qualification since the
|
|
# BITE tester doesn't like us doing reverse SDP for some test cases, for LE
|
|
# this disables the GATT client functionally so it can be used in system which
|
|
# can only operate as peripheral.
|
|
# Defaults to 'true'.
|
|
#ReverseServiceDiscovery = true
|
|
|
|
# Enable name resolving after inquiry. Set it to 'false' if you don't need
|
|
# remote devices name and want shorter discovery cycle. Defaults to 'true'.
|
|
#NameResolving = true
|
|
|
|
# Enable runtime persistency of debug link keys. Default is false which
|
|
# makes debug link keys valid only for the duration of the connection
|
|
# that they were created for.
|
|
#DebugKeys = false
|
|
|
|
# Restricts all controllers to the specified transport. Default value
|
|
# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
|
|
# Possible values: "dual", "bredr", "le"
|
|
#ControllerMode = dual
|
|
|
|
# Enables Multi Profile Specification support. This allows to specify if
|
|
# system supports only Multiple Profiles Single Device (MPSD) configuration
|
|
# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
|
|
# Devices (MPMD) configurations.
|
|
# Possible values: "off", "single", "multiple"
|
|
#MultiProfile = off
|
|
|
|
# Permanently enables the Fast Connectable setting for adapters that
|
|
# support it. When enabled other devices can connect faster to us,
|
|
# however the tradeoff is increased power consumptions. This feature
|
|
# will fully work only on kernel version 4.1 and newer. Defaults to
|
|
# 'false'.
|
|
#FastConnectable = false
|
|
|
|
# Default privacy setting.
|
|
# Enables use of private address.
|
|
# Possible values: "off", "device", "network"
|
|
# "network" option not supported currently
|
|
# Defaults to "off"
|
|
# Privacy = off
|
|
|
|
# Specify the policy to the JUST-WORKS repairing initiated by peer
|
|
# Possible values: "never", "confirm", "always"
|
|
# Defaults to "never"
|
|
#JustWorksRepairing = never
|
|
|
|
# How long to keep temporary devices around
|
|
# The value is in seconds. Default is 30.
|
|
# 0 = disable timer, i.e. never keep temporary devices
|
|
#TemporaryTimeout = 30
|
|
|
|
# Enables the device to issue an SDP request to update known services when
|
|
# profile is connected. Defaults to true.
|
|
#RefreshDiscovery = true
|
|
|
|
[Controller]
|
|
# The following values are used to load default adapter parameters. BlueZ loads
|
|
# the values into the kernel before the adapter is powered if the kernel
|
|
# supports the MGMT_LOAD_DEFAULT_PARAMETERS command. If a value isn't provided,
|
|
# the kernel will be initialized to it's default value. The actual value will
|
|
# vary based on the kernel version and thus aren't provided here.
|
|
# The Bluetooth Core Specification should be consulted for the meaning and valid
|
|
# domain of each of these values.
|
|
|
|
# BR/EDR Page scan activity configuration
|
|
#BRPageScanType=
|
|
#BRPageScanInterval=
|
|
#BRPageScanWindow=
|
|
|
|
# BR/EDR Inquiry scan activity configuration
|
|
#BRInquiryScanType=
|
|
#BRInquiryScanInterval=
|
|
#BRInquiryScanWindow=
|
|
|
|
# BR/EDR Link supervision timeout
|
|
#BRLinkSupervisionTimeout=
|
|
|
|
# BR/EDR Page Timeout
|
|
#BRPageTimeout=
|
|
|
|
# BR/EDR Sniff Intervals
|
|
#BRMinSniffInterval=
|
|
#BRMaxSniffInterval=
|
|
|
|
# LE advertisement interval (used for legacy advertisement interface only)
|
|
#LEMinAdvertisementInterval=
|
|
#LEMaxAdvertisementInterval=
|
|
#LEMultiAdvertisementRotationInterval=
|
|
|
|
# LE scanning parameters used for passive scanning supporting auto connect
|
|
# scenarios
|
|
#LEScanIntervalAutoConnect=
|
|
#LEScanWindowAutoConnect=
|
|
|
|
# LE scanning parameters used for passive scanning supporting wake from suspend
|
|
# scenarios
|
|
#LEScanIntervalSuspend=
|
|
#LEScanWindowSuspend=
|
|
|
|
# LE scanning parameters used for active scanning supporting discovery
|
|
# proceedure
|
|
#LEScanIntervalDiscovery=
|
|
#LEScanWindowDiscovery=
|
|
|
|
# LE scanning parameters used for passive scanning supporting the advertisement
|
|
# monitor Apis
|
|
#LEScanIntervalAdvMonitor=
|
|
#LEScanWindowAdvMonitor=
|
|
|
|
# LE scanning parameters used for connection establishment.
|
|
#LEScanIntervalConnect=
|
|
#LEScanWindowConnect=
|
|
|
|
# LE default connection parameters. These values are superceeded by any
|
|
# specific values provided via the Load Connection Parameters interface
|
|
#LEMinConnectionInterval=
|
|
#LEMaxConnectionInterval=
|
|
#LEConnectionLatency=
|
|
#LEConnectionSupervisionTimeout=
|
|
#LEAutoconnecttimeout=
|
|
|
|
[GATT]
|
|
# GATT attribute cache.
|
|
# Possible values:
|
|
# always: Always cache attributes even for devices not paired, this is
|
|
# recommended as it is best for interoperability, with more consistent
|
|
# reconnection times and enables proper tracking of notifications for all
|
|
# devices.
|
|
# yes: Only cache attributes of paired devices.
|
|
# no: Never cache attributes
|
|
# Default: always
|
|
#Cache = always
|
|
|
|
# Minimum required Encryption Key Size for accessing secured characteristics.
|
|
# Possible values: 0 and 7-16. 0 means don't care.
|
|
# Defaults to 0
|
|
#KeySize = 0
|
|
|
|
# Exchange MTU size.
|
|
# Possible values: 23-517
|
|
# Defaults to 517
|
|
#ExchangeMTU = 517
|
|
|
|
# Number of ATT channels
|
|
# Possible values: 1-5 (1 disables EATT)
|
|
# Default to 3
|
|
#Channels = 3
|
|
|
|
[Policy]
|
|
#
|
|
# The ReconnectUUIDs defines the set of remote services that should try
|
|
# to be reconnected to in case of a link loss (link supervision
|
|
# timeout). The policy plugin should contain a sane set of values by
|
|
# default, but this list can be overridden here. By setting the list to
|
|
# empty the reconnection feature gets disabled.
|
|
#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb
|
|
|
|
# ReconnectAttempts define the number of attempts to reconnect after a link
|
|
# lost. Setting the value to 0 disables reconnecting feature.
|
|
#ReconnectAttempts=7
|
|
|
|
# ReconnectIntervals define the set of intervals in seconds to use in between
|
|
# attempts.
|
|
# If the number of attempts defined in ReconnectAttempts is bigger than the
|
|
# set of intervals the last interval is repeated until the last attempt.
|
|
#ReconnectIntervals=1,2,4,8,16,32,64
|
|
|
|
# AutoEnable defines option to enable all controllers when they are found.
|
|
# This includes adapters present on start as well as adapters that are plugged
|
|
# in later on. Defaults to 'false'.
|
|
AutoEnable=true
|