You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

255 lines
9.0 KiB
Plaintext

7 years ago
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
committing changes in /etc after apt run Package changes: -alsa-utils 1.1.3-1 armhf -apt 1.6.1 armhf +alsa-utils 1.1.6-1 armhf +apt 1.6.3 armhf -apt-utils 1.6.1 armhf +apt-utils 1.6.3 armhf -bash 4.4.18-2+b1 armhf +bash 4.4.18-3.1 armhf -bind9 1:9.11.3+dfsg-1 armhf -bind9-host 1:9.11.3+dfsg-1 armhf -bind9utils 1:9.11.3+dfsg-1 armhf -binutils 2.30-15+rpi1 armhf -binutils-arm-linux-gnueabihf 2.30-15+rpi1 armhf -binutils-common 2.30-15+rpi1 armhf -blends-tasks 0.6.100 all -bluez 5.49-1+b2 armhf -bluez-firmware 1.2-3+rpt5 all +bind9 1:9.11.3+dfsg-2 armhf +bind9-host 1:9.11.3+dfsg-2 armhf +bind9utils 1:9.11.3+dfsg-2 armhf +binutils 2.30-22+rpi1 armhf +binutils-arm-linux-gnueabihf 2.30-22+rpi1 armhf +binutils-common 2.30-22+rpi1 armhf +blends-tasks 0.7.0 all +bluez 5.49-4 armhf +bluez-firmware 1.2-4 all -build-essential 12.4+b1 armhf +build-essential 12.5 armhf -certbot 0.24.0-1 all +certbot 0.25.0-1 all -cifs-utils 2:6.8-1 armhf +cifs-utils 2:6.8-2 armhf -cpp 4:7.2.0-1d1 armhf -cpp-6 6.4.0-12+rpi1 armhf -cpp-7 7.3.0-12 armhf +cpp 4:7.3.0-3+rpi1 armhf +cpp-6 6.4.0-18+rpi1 armhf +cpp-7 7.3.0-19 armhf -dbus 1.12.8-2 armhf -dbus-user-session 1.12.8-2 armhf +dbus 1.12.8-3 armhf +dbus-user-session 1.12.8-3 armhf -debconf 1.5.66 all -debconf-i18n 1.5.66 all -debconf-utils 1.5.66 all -debianutils 4.8.4 armhf +debconf 1.5.67 all +debconf-i18n 1.5.67 all +debconf-utils 1.5.67 all +debianutils 4.8.6 armhf -dirmngr 2.2.5-1 armhf +dirmngr 2.2.8-3 armhf -dmsetup 2:1.02.145-4.1 armhf -dnsutils 1:9.11.3+dfsg-1 armhf -dosfstools 4.1-1 armhf +dmsetup 2:1.02.145-4.1+b4 armhf +dnsutils 1:9.11.3+dfsg-2 armhf +dosfstools 4.1-2 armhf -e2fslibs 1.44.1-2 armhf -e2fsprogs 1.44.1-2 armhf -e2fsprogs-l10n 1.44.1-2 all +e2fslibs 1.44.2-1 armhf +e2fsprogs 1.44.2-1 armhf +e2fsprogs-l10n 1.44.2-1 all -exim4-base 4.91-3 armhf -exim4-config 4.91-3 all -exim4-daemon-light 4.91-3 armhf -eyed3 0.8.4-2 all +exim4-base 4.91-5 armhf +exim4-config 4.91-5 all +exim4-daemon-light 4.91-5 armhf +eyed3 0.8.5-1 all -fakeroot 1.22-2 armhf +fakeroot 1.23-1 armhf -file 1:5.33-2 armhf +file 1:5.33-3 armhf -fontconfig 2.13.0-4 armhf -fontconfig-config 2.13.0-4 all +fontconfig 2.13.0-5 armhf +fontconfig-config 2.13.0-5 all -fonts-liberation 1:1.07.4-6 all -g++ 4:7.2.0-1d1 armhf -g++-7 7.3.0-12 armhf +fonts-liberation 1:1.07.4-7 all +g++ 4:7.3.0-3+rpi1 armhf +g++-7 7.3.0-19 armhf -gcc 4:7.2.0-1d1 armhf +gcc 4:7.3.0-3+rpi1 armhf -gcc-4.9-base 4.9.4-2+rpi1 armhf +gcc-4.9-base 4.9.4-2+rpi1+b7 armhf -gcc-6 6.4.0-12+rpi1 armhf -gcc-6-base 6.4.0-12+rpi1 armhf -gcc-7 7.3.0-12 armhf -gcc-7-base 7.3.0-12 armhf -gcc-8-base 8.1.0-1+rpi1 armhf +gcc-6 6.4.0-18+rpi1 armhf +gcc-6-base 6.4.0-18+rpi1 armhf +gcc-7 7.3.0-19 armhf +gcc-7-base 7.3.0-19 armhf +gcc-8-base 8.1.0-9+rpi1 armhf -git 1:2.17.0-1 armhf -git-man 1:2.17.0-1 all -glib-networking 2.56.0-1 armhf -glib-networking-common 2.56.0-1 all -glib-networking-services 2.56.0-1 armhf +git 1:2.18.0-1 armhf +git-man 1:2.18.0-1 all +glib-networking 2.56.1-1 armhf +glib-networking-common 2.56.1-1 all +glib-networking-services 2.56.1-1 armhf -gnupg 2.2.5-1 armhf -gnupg-agent 2.2.5-1 all -gnupg-l10n 2.2.5-1 all -gnupg-utils 2.2.5-1 armhf -gpg 2.2.5-1 armhf -gpg-agent 2.2.5-1 armhf -gpg-wks-client 2.2.5-1 armhf -gpg-wks-server 2.2.5-1 armhf -gpgconf 2.2.5-1 armhf -gpgsm 2.2.5-1 armhf -gpgv 2.2.5-1 armhf +gnupg 2.2.8-3 all +gnupg-agent 2.2.8-3 all +gnupg-l10n 2.2.8-3 all +gnupg-utils 2.2.8-3 armhf +gpg 2.2.8-3 armhf +gpg-agent 2.2.8-3 armhf +gpg-wks-client 2.2.8-3 armhf +gpg-wks-server 2.2.8-3 armhf +gpgconf 2.2.8-3 armhf +gpgsm 2.2.8-3 armhf +gpgv 2.2.8-3 armhf -gtk-update-icon-cache 3.22.29-3+rpi1 armhf +gtk-update-icon-cache 3.22.30-2+rpi1 armhf -hardlink 0.3.0 armhf +hardlink 0.3.1 armhf -id3tool 1.2a-8 armhf +id3tool 1.2a-9 armhf -info 6.5.0.dfsg.1-2 armhf +info 6.5.0.dfsg.1-4 armhf -install-info 6.5.0.dfsg.1-2 armhf +install-info 6.5.0.dfsg.1-4 armhf -iproute2 4.16.0-2 armhf +iproute2 4.17.0-2 armhf -kbd 2.0.4-2 armhf +kbd 2.0.4-3 armhf -libapparmor1 2.12-4 armhf -libapt-inst2.0 1.6.1 armhf -libapt-pkg5.0 1.6.1 armhf +libapparmor1 2.12-5 armhf +libapt-inst2.0 1.6.3 armhf +libapt-pkg5.0 1.6.3 armhf -libasan3 6.4.0-12+rpi1 armhf -libasan4 7.3.0-12 armhf -libasound2 1.1.3-5+rpi3 armhf -libasound2-data 1.1.3-5+rpi3 all +libasan3 6.4.0-18+rpi1 armhf +libasan4 7.3.0-19 armhf +libasound2 1.1.6-1 armhf +libasound2-data 1.1.6-1 all -libatomic1 8.1.0-1+rpi1 armhf +libatomic1 8.1.0-9+rpi1 armhf -libavcodec57 7:3.4.2-2+b1 armhf -libavformat57 7:3.4.2-2+b1 armhf -libavutil55 7:3.4.2-2+b1 armhf -libbabeltrace1 1.5.5-1 armhf -libbdplus0 0.1.2-2 armhf -libbind9-160 1:9.11.3+dfsg-1 armhf -libbinutils 2.30-15+rpi1 armhf +libavcodec57 7:3.4.2-2+b2 armhf +libavformat57 7:3.4.2-2+b2 armhf +libavutil55 7:3.4.2-2+b2 armhf +libbabeltrace1 1.5.6-1 armhf +libbdplus0 0.1.2-3 armhf +libbind9-160 1:9.11.3+dfsg-2 armhf +libbinutils 2.30-22+rpi1 armhf -libboost-filesystem1.62.0 1.62.0+dfsg-5+b2 armhf -libboost-iostreams1.58.0 1.58.0+dfsg-5.1+rpi1+b3 armhf -libboost-iostreams1.60.0 1.60.0+dfsg-6+b4 armhf -libboost-iostreams1.62.0 1.62.0+dfsg-5+b2 armhf -libboost-system1.62.0 1.62.0+dfsg-5+b2 armhf -libbsd0 0.8.7-1 armhf +libboost-filesystem1.62.0 1.62.0+dfsg-6 armhf +libboost-iostreams1.58.0 1.58.0+dfsg-5.1+rpi1+b4 armhf +libboost-iostreams1.60.0 1.60.0+dfsg-6+b5 armhf +libboost-iostreams1.62.0 1.62.0+dfsg-6 armhf +libboost-system1.62.0 1.62.0+dfsg-6 armhf +libbsd0 0.9.1-1 armhf -libcc1-0 8.1.0-1+rpi1 armhf -libchromaprint1 1.4.3-1 armhf -libcilkrts5 7.3.0-12 armhf +libcc1-0 8.1.0-9+rpi1 armhf +libchromaprint1 1.4.3-2 armhf +libcilkrts5 7.3.0-19 armhf -libcom-err2 1.44.1-2 armhf -libcomerr2 1.44.1-2 armhf +libcom-err2 1.44.2-1 armhf +libcomerr2 1.44.2-1 armhf -libcryptsetup12 2:2.0.2-1 armhf +libcryptsetup12 2:2.0.3-4 armhf -libcups2 2.2.7-3+b1 armhf -libcurl3-gnutls 7.58.0-2 armhf +libcups2 2.2.8-4 armhf +libcurl3-gnutls 7.60.0-2 armhf -libdatrie1 0.2.11-1 armhf +libdatrie1 0.2.12-1 armhf -libdbus-1-3 1.12.8-2 armhf +libdbus-1-3 1.12.8-3 armhf -libdevmapper1.02.1 2:1.02.145-4.1 armhf -libdns-export1100 1:9.11.3+dfsg-1 armhf +libdevmapper1.02.1 2:1.02.145-4.1+b4 armhf +libdns-export1100 1:9.11.3+dfsg-2 armhf -libdns1100 1:9.11.3+dfsg-1 armhf +libdns1100 1:9.11.3+dfsg-2 armhf -libdrm-amdgpu1 2.4.91-2+rpi1 armhf -libdrm-common 2.4.91-2+rpi1 all -libdrm-etnaviv1 2.4.91-2+rpi1 armhf -libdrm-freedreno1 2.4.91-2+rpi1 armhf -libdrm-nouveau2 2.4.91-2+rpi1 armhf -libdrm-radeon1 2.4.91-2+rpi1 armhf -libdrm2 2.4.91-2+rpi1 armhf -libdw1 0.170-0.4 armhf -libedit2 3.1-20170329-1 armhf -libelf1 0.170-0.4 armhf +libdrm-amdgpu1 2.4.92-1+rpi1 armhf +libdrm-common 2.4.92-1+rpi1 all +libdrm-etnaviv1 2.4.92-1+rpi1 armhf +libdrm-freedreno1 2.4.92-1+rpi1 armhf +libdrm-nouveau2 2.4.92-1+rpi1 armhf +libdrm-radeon1 2.4.92-1+rpi1 armhf +libdrm2 2.4.92-1+rpi1 armhf +libdw1 0.170-0.5 armhf +libedit2 3.1-20180525-1 armhf +libelf1 0.170-0.5 armhf -liberror-perl 0.17025-1 all +liberror-perl 0.17026-1 all -libext2fs2 1.44.1-2 armhf -libfakeroot 1.22-2 armhf +libext2fs2 1.44.2-1 armhf +libfakeroot 1.23-1 armhf -libfftw3-single3 3.3.7-1+b2 armhf +libfftw3-single3 3.3.8-1 armhf -libflac8 1.3.2-2 armhf +libflac8 1.3.2-3 armhf -libfontconfig1 2.13.0-4 armhf +libfontconfig1 2.13.0-5 armhf -libfribidi0 0.19.7-2 armhf +libfribidi0 0.19.7-3 armhf -libgail-common 2.24.32-1 armhf -libgail18 2.24.32-1 armhf -libgcc-6-dev 6.4.0-12+rpi1 armhf -libgcc-7-dev 7.3.0-12 armhf -libgcc1 1:8.1.0-1+rpi1 armhf +libgail-common 2.24.32-2 armhf +libgail18 2.24.32-2 armhf +libgcc-6-dev 6.4.0-18+rpi1 armhf +libgcc-7-dev 7.3.0-19 armhf +libgcc1 1:8.1.0-9+rpi1 armhf -libgcrypt20 1.8.2-2 armhf +libgcrypt20 1.8.3-1 armhf -libgfortran4 7.3.0-12 armhf +libgfortran4 7.3.0-19 armhf -libgl1 1.0.0+git20180308-2 armhf -libgl1-mesa-dri 18.0.3-1 armhf -libglapi-mesa 18.0.3-1 armhf +libgl1 1.0.0+git20180308-3 armhf +libgl1-mesa-dri 18.1.3-1 armhf +libglapi-mesa 18.1.3-1 armhf -libglvnd0 1.0.0+git20180308-2 armhf -libglx-mesa0 18.0.3-1 armhf -libglx0 1.0.0+git20180308-2 armhf +libglvnd0 1.0.0+git20180308-3 armhf +libglx-mesa0 18.1.3-1 armhf +libglx0 1.0.0+git20180308-3 armhf -libgomp1 8.1.0-1+rpi1 armhf +libgomp1 8.1.0-9+rpi1 armhf -libgtk-3-0 3.22.29-3+rpi1 armhf -libgtk-3-bin 3.22.29-3+rpi1 armhf -libgtk-3-common 3.22.29-3+rpi1 all -libgtk2.0-0 2.24.32-1 armhf -libgtk2.0-bin 2.24.32-1 armhf -libgtk2.0-common 2.24.32-1 all -libharfbuzz0b 1.7.6-1 armhf +libgtk-3-0 3.22.30-2+rpi1 armhf +libgtk-3-bin 3.22.30-2+rpi1 armhf +libgtk-3-common 3.22.30-2+rpi1 all +libgtk2.0-0 2.24.32-2 armhf +libgtk2.0-bin 2.24.32-2 armhf +libgtk2.0-common 2.24.32-2 all +libharfbuzz0b 1.8.2-2 armhf -libhttp-message-perl 6.16-1 all +libhttp-message-perl 6.18-1 all +libicu-le-hb0 1.0.3+git161113-5 armhf +libicu60 60.2-6 armhf -libirs-export160 1:9.11.3+dfsg-1 armhf -libirs160 1:9.11.3+dfsg-1 armhf +libirs-export160 1:9.11.3+dfsg-2 armhf +libirs160 1:9.11.3+dfsg-2 armhf -libisc-export169 1:9.11.3+dfsg-1 armhf +libisc-export169 1:9.11.3+dfsg-2 armhf -libisc169 1:9.11.3+dfsg-1 armhf -libisccc160 1:9.11.3+dfsg-1 armhf -libisccfg-export160 1:9.11.3+dfsg-1 armhf -libisccfg160 1:9.11.3+dfsg-1 armhf +libisc169 1:9.11.3+dfsg-2 armhf +libisccc160 1:9.11.3+dfsg-2 armhf +libisccfg-export160 1:9.11.3+dfsg-2 armhf +libisccfg160 1:9.11.3+dfsg-2 armhf +libisl19 0.19-1 armhf +libjs-sphinxdoc 1.7.5-6 all +libjs-underscore 1.8.3~dfsg-1 all -liblcms2-2 2.9-1 armhf +liblcms2-2 2.9-2 armhf -libllvm5.0 1:5.0.1-4+rpi1 armhf -libllvm6.0 1:6.0-3+rpi1 armhf +libllvm5.0 1:5.0.2-2+rpi1 armhf +libllvm6.0 1:6.0.1-2+rpi1 armhf -liblwres160 1:9.11.3+dfsg-1 armhf -liblz4-1 1.8.1.2-1+rpi1 armhf +liblwres160 1:9.11.3+dfsg-2 armhf +liblz4-1 1.8.2-1+rpi1 armhf -libmagic-mgc 1:5.33-2 armhf -libmagic1 1:5.33-2 armhf +libmagic-mgc 1:5.33-3 armhf +libmagic1 1:5.33-3 armhf -libncurses5 6.1+20180210-2 armhf -libncursesw5 6.1+20180210-2 armhf -libncursesw6 6.1+20180210-2 armhf +libncurses5 6.1+20180210-4 armhf +libncurses6 6.1+20180210-4 armhf +libncursesw5 6.1+20180210-4 armhf +libncursesw6 6.1+20180210-4 armhf -libnewt0.52 0.52.20-4 armhf +libnewt0.52 0.52.20-5 armhf -libnghttp2-14 1.31.1-1 armhf +libnghttp2-14 1.32.0-1 armhf -libnl-3-200 3.2.27-2 armhf -libnl-genl-3-200 3.2.27-2 armhf -libnpth0 1.5-3 armhf -libnspr4 2:4.19-1 armhf -libnss-mdns 0.14.1-1 armhf -libnss-systemd 238-4 armhf -libnss3 2:3.36.1-1 armhf +libnl-3-200 3.4.0-1 armhf +libnl-genl-3-200 3.4.0-1 armhf +libnpth0 1.5-4 armhf +libnspr4 2:4.19-3+rpi1 armhf +libnss-mdns 0.14.1-1+b4 armhf +libnss-systemd 238-5 armhf +libnss3 2:3.38-1 armhf -libopenmpt0 0.3.9-1 armhf -libopus0 1.2.1-1 armhf -libp11-kit0 0.23.10-2 armhf +libopenmpt0 0.3.10-1 armhf +libopus0 1.3~beta+20180518-1 armhf +libp11-kit0 0.23.12-2 armhf -libpam-systemd 238-4 armhf +libpam-systemd 238-5 armhf -libpango-1.0-0 1.42.0-1 armhf -libpangocairo-1.0-0 1.42.0-1 armhf -libpangoft2-1.0-0 1.42.0-1 armhf +libpango-1.0-0 1.42.1-2 armhf +libpangocairo-1.0-0 1.42.1-2 armhf +libpangoft2-1.0-0 1.42.1-2 armhf -libperl5.26 5.26.2-3 armhf +libperl5.26 5.26.2-6 armhf -libplymouth4 0.9.3-2 armhf +libplymouth4 0.9.3-3 armhf +libprocps7 2:3.3.15-2 armhf -libpsl5 0.20.1-1 armhf -libpulse0 11.1-5+b2 armhf -libpython-all-dev 2.7.15~rc1-1 armhf -libpython-dev 2.7.15~rc1-1 armhf -libpython-stdlib 2.7.15~rc1-1 armhf +libpsl5 0.20.2-1 armhf +libpulse0 11.1-5+b3 armhf +libpython-all-dev 2.7.15-3 armhf +libpython-dev 2.7.15-3 armhf +libpython-stdlib 2.7.15-3 armhf +libpython2-dev 2.7.15-3 armhf +libpython2-stdlib 2.7.15-3 armhf -libpython3-dev 3.6.4-1 armhf -libpython3-stdlib 3.6.4-1 armhf +libpython3-dev 3.6.5-3 armhf +libpython3-stdlib 3.6.5-3 armhf -libpython3.6 3.6.5~rc1-1 armhf -libpython3.6-dev 3.6.5~rc1-1 armhf -libpython3.6-minimal 3.6.5~rc1-1 armhf -libpython3.6-stdlib 3.6.5~rc1-1 armhf -libraspberrypi-bin 1.20180417-1 armhf -libraspberrypi-dev 1.20180417-1 armhf -libraspberrypi-doc 1.20180417-1 armhf -libraspberrypi0 1.20180417-1 armhf +libpython3.6 3.6.6-1 armhf +libpython3.6-dev 3.6.6-1 armhf +libpython3.6-minimal 3.6.6-1 armhf +libpython3.6-stdlib 3.6.6-1 armhf +libraspberrypi-bin 1.20180703-1 armhf +libraspberrypi-dev 1.20180703-1 armhf +libraspberrypi-doc 1.20180703-1 armhf +libraspberrypi0 1.20180703-1 armhf -librtmp1 2.4+20151223.gitfa8646d.1-1 armhf +librtmp1 2.4+20151223.gitfa8646d.1-2 armhf -libruby2.5 2.5.1-1 armhf +libruby2.5 2.5.1-3 armhf -libseccomp2 2.3.3-2 armhf -libselinux1 2.7-2 armhf -libsemanage-common 2.7-2 all -libsemanage1 2.7-2 armhf +libseccomp2 2.3.3-3 armhf +libselinux1 2.8-1 armhf +libsemanage-common 2.8-1 all +libsemanage1 2.8-1 armhf -libsepol1 2.7-1 armhf +libsepol1 2.8-1 armhf -libsoup-gnome2.4-1 2.62.1-1 armhf -libsoup2.4-1 2.62.1-1 armhf +libsoup-gnome2.4-1 2.62.2-2 armhf +libsoup2.4-1 2.62.2-2 armhf -libsqlite3-0 3.23.1-1 armhf -libss2 1.44.1-2 armhf +libsqlite3-0 3.24.0-1 armhf +libss2 1.44.2-1 armhf -libssl1.1 1.1.0h-2 armhf -libstdc++-7-dev 7.3.0-12 armhf -libstdc++6 8.1.0-1+rpi1 armhf -libswresample2 7:3.4.2-2+b1 armhf +libssl1.1 1.1.0h-4 armhf +libstdc++-7-dev 7.3.0-19 armhf +libstdc++6 8.1.0-9+rpi1 armhf +libswresample2 7:3.4.2-2+b2 armhf -libsystemd0 238-4 armhf -libtalloc2 2.1.10-2 armhf -libtasn1-6 4.13-2 armhf +libsystemd0 238-5 armhf +libtalloc2 2.1.11-2 armhf +libtasn1-6 4.13-3 armhf -libtiff5 4.0.9-5 armhf +libtiff5 4.0.9-6 armhf -libtinfo5 6.1+20180210-2 armhf -libtinfo6 6.1+20180210-2 armhf +libtinfo5 6.1+20180210-4 armhf +libtinfo6 6.1+20180210-4 armhf -libtwolame0 0.3.13-3 armhf -libubsan0 7.3.0-12 armhf +libtwolame0 0.3.13-4 armhf +libubsan0 7.3.0-19 armhf -libudev1 238-4 armhf -libunbound2 1.6.7-1+b1 armhf +libudev1 238-5 armhf +libunbound2 1.7.3-1 armhf -libuv1 1.20.3-2 armhf +libuv1 1.21.0-2 armhf -libwbclient0 2:4.7.4+dfsg-2 armhf +libwbclient0 2:4.8.2+dfsg-2 armhf -libwww-perl 6.33-1 all +libwww-perl 6.34-1 all -libxapian30 1.4.5-1 armhf +libx265-160 2.8-4 armhf +libxapian30 1.4.6-2 armhf -libxml2 2.9.4+dfsg1-6.1 armhf +libxml2 2.9.4+dfsg1-7 armhf -libxslt1.1 1.1.29-5 armhf +libxslt1.1 1.1.32-2 armhf -libyaml-0-2 0.1.7-2 armhf -libzstd1 1.3.4+dfsg-2+rpi1 armhf +libyaml-0-2 0.2.1-1 armhf +libzstd1 1.3.4+dfsg-3+rpi1 armhf -linux-libc-dev 4.15.17-1+rpi1 armhf +linux-libc-dev 4.16.16-2+rpi1 armhf -lsb-base 9.20161125+rpi1 all -lsb-release 9.20161125+rpi1 all +lsb-base 9.20170808+rpi1 all +lsb-release 9.20170808+rpi1 all -mesa-va-drivers 18.0.3-1 armhf -mesa-vdpau-drivers 18.0.3-1 armhf -mime-support 3.60 all +mesa-va-drivers 18.1.3-1 armhf +mesa-vdpau-drivers 18.1.3-1 armhf +mime-support 3.61 all -nano 2.9.6-1 armhf +nano 2.9.8-1 armhf -ncurses-base 6.1+20180210-2 all -ncurses-bin 6.1+20180210-2 armhf -ncurses-term 6.1+20180210-2 all +ncurses-base 6.1+20180210-4 all +ncurses-bin 6.1+20180210-4 armhf +ncurses-term 6.1+20180210-4 all -openssl 1.1.0h-2 armhf +openssl 1.1.0h-4 armhf -perl 5.26.2-3 armhf -perl-base 5.26.2-3 armhf -perl-modules-5.26 5.26.2-3 all +perl 5.26.2-6 armhf +perl-base 5.26.2-6 armhf +perl-modules-5.26 5.26.2-6 all -pi-bluetooth 0.1.7 all +pi-bluetooth 0.1.8 all -plymouth 0.9.3-2 armhf -policycoreutils 2.7-1 armhf -procps 2:3.3.14-1 armhf +plymouth 0.9.3-3 armhf +policycoreutils 2.8-1 armhf +procps 2:3.3.15-2 armhf -python 2.7.15~rc1-1 armhf -python-all 2.7.15~rc1-1 armhf -python-all-dev 2.7.15~rc1-1 armhf -python-apt-common 1.6.0 all +python 2.7.15-3 armhf +python-all 2.7.15-3 armhf +python-all-dev 2.7.15-3 armhf +python-apt-common 1.6.2 all +python-configparser 3.5.0-1 all -python-cryptography 2.1.4-1 armhf -python-dbus 1.2.6-1 armhf -python-dev 2.7.15~rc1-1 armhf +python-cryptography 2.2.2-1 armhf +python-dbus 1.2.8-2 armhf +python-dev 2.7.15-3 armhf +python-entrypoints 0.2.3-1 all -python-keyring 10.6.0-1 all +python-keyring 13.1.0-1 all -python-minimal 2.7.15~rc1-1 armhf -python-newt 0.52.20-4 armhf +python-minimal 2.7.15-3 armhf +python-newt 0.52.20-5 armhf -python-pkg-resources 39.0.1-2 all -python-pyicu 2.0.3-1 armhf +python-pkg-resources 39.2.0-1 all +python-pyicu 2.0.3-1+b1 armhf -python-setuptools 39.0.1-2 all +python-setuptools 39.2.0-1 all +python2 2.7.15-3 armhf +python2-dev 2.7.15-3 armhf +python2-minimal 2.7.15-3 armhf -python3 3.6.4-1 armhf -python3-acme 0.24.0-2 all -python3-apt 1.6.0 armhf +python3 3.6.5-3 armhf +python3-acme 0.25.1-1 all +python3-apt 1.6.2 armhf -python3-certbot 0.24.0-1 all -python3-certifi 2018.1.18-3 all +python3-certbot 0.25.0-1 all +python3-certifi 2018.4.16-1 all -python3-configargparse 0.11.0-1 all +python3-configargparse 0.13.0-1 all -python3-cryptography 2.1.4-1 armhf -python3-dbus 1.2.6-1 armhf -python3-debconf 1.5.66 all +python3-cryptography 2.2.2-1 armhf +python3-dbus 1.2.8-2 armhf +python3-debconf 1.5.67 all -python3-dev 3.6.4-1 armhf -python3-distutils 3.6.5~rc1-1 all -python3-eyed3 0.8.4-2 all +python3-dev 3.6.5-3 armhf +python3-distutils 3.6.6-1 all +python3-entrypoints 0.2.3-1 all +python3-eyed3 0.8.5-1 all -python3-josepy 1.1.0-1 all -python3-keyring 10.6.0-1 all +python3-josepy 1.1.0-2 all +python3-keyring 13.1.0-1 all -python3-lib2to3 3.6.5~rc1-1 all +python3-lib2to3 3.6.6-1 all -python3-minimal 3.6.4-1 armhf +python3-minimal 3.6.5-3 armhf -python3-openssl 17.5.0-1 all +python3-openssl 18.0.0-1 all -python3-pkg-resources 39.0.1-2 all +python3-pkg-resources 39.2.0-1 all -python3-rfc3339 1.0-4 all +python3-requests-toolbelt 0.8.0-1 all +python3-rfc3339 1.1-1 all -python3-setuptools 39.0.1-2 all +python3-setuptools 39.2.0-1 all -python3-tz 2018.4-1 all +python3-tz 2018.5-1 all -python3.6 3.6.5~rc1-1 armhf -python3.6-dev 3.6.5~rc1-1 armhf -python3.6-minimal 3.6.5~rc1-1 armhf +python3.6 3.6.6-1 armhf +python3.6-dev 3.6.6-1 armhf +python3.6-minimal 3.6.6-1 armhf -raspberrypi-bootloader 1.20180417-1 armhf -raspberrypi-kernel 1.20180417-1 armhf +raspberrypi-bootloader 1.20180703-1 armhf +raspberrypi-kernel 1.20180703-1 armhf -raspi-config 20180406+1 all +raspi-config 20180518 all -rsyslog 8.34.0-1 armhf +rsyslog 8.36.0-1 armhf -ruby-power-assert 0.3.0-1 all +ruby-power-assert 1.1.1-1 all -ruby2.5 2.5.1-1 armhf +ruby-xmlrpc 0.3.0-1 all +ruby2.5 2.5.1-3 armhf -samba-common 2:4.7.4+dfsg-2 all +samba-common 2:4.8.2+dfsg-2 all -sed 4.4-2 armhf -selinux-utils 2.7-2 armhf +sed 4.5-1 armhf +selinux-utils 2.8-1 armhf -systemd 238-4 armhf -systemd-sysv 238-4 armhf +systemd 238-5 armhf +systemd-sysv 238-5 armhf -tar 1.29b-2 armhf -tasksel 3.43 all -tasksel-data 3.43 all +tar 1.30+dfsg-2 armhf +tasksel 3.44 all +tasksel-data 3.44 all -udev 238-4 armhf +udev 238-5 armhf -vim-common 2:8.0.1766-1 all -vim-nox 2:8.0.1766-1 armhf -vim-runtime 2:8.0.1766-1 all -vim-tiny 2:8.0.1766-1 armhf +vim-common 2:8.1.0089-1 all +vim-nox 2:8.1.0089-1 armhf +vim-runtime 2:8.1.0089-1 all +vim-tiny 2:8.1.0089-1 armhf -whiptail 0.52.20-4 armhf -whois 5.3.0 armhf +whiptail 0.52.20-5 armhf +whois 5.3.1 armhf -wpasupplicant 2:2.6-16 armhf +wpasupplicant 2:2.6-17 armhf -xdg-utils 1.1.2-2 all +xdg-utils 1.1.3-1 all -xxd 2:8.0.1766-1 armhf +xxd 2:8.1.0089-1 armhf
6 years ago
# Most people will want "standalone server" or "member server".
7 years ago
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
[homes]
comment = Home Directories
browseable = no
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
read only = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
directory mask = 0700
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
valid users = %S
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin