You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

208 lines
7.5 KiB
Plaintext

2 years ago
# Fail2Ban configuration file
#
# Author: Russell Odom <russ@gloomytrousers.co.uk>
# Submits attack reports to DShield (http://www.dshield.org/)
#
# You MUST configure at least:
# <port> (the port that's being attacked - use number not name).
#
# You SHOULD also provide:
# <myip> (your public IP address, if it's not the address of eth0)
# <userid> (your DShield userID, if you have one - recommended, but reports will
# be used anonymously if not)
# <protocol> (the protocol in use - defaults to tcp)
#
# Best practice is to provide <port> and <protocol> in jail.conf like this:
# action = dshield[port=1234,protocol=tcp]
#
# ...and create "dshield.local" with contents something like this:
# [Init]
# myip = 10.0.0.1
# userid = 12345
#
# Other useful configuration values are <mailargs> (you can use for specifying
# a different sender address for the report e-mails, which should match what is
# configured at DShield), and <lines>/<minreportinterval>/<maxbufferage> (to
# configure how often the buffer is flushed).
#
[Definition]
# bypass ban/unban for restored tickets
norestored = 1
# Option: actionstart
# Notes.: command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
# Values: CMD
#
actionstart =
# Option: actionstop
# Notes.: command executed at the stop of jail (or at the end of Fail2Ban)
# Values: CMD
#
actionstop = if [ -f <tmpfile>.buffer ]; then
cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ `date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'` Fail2Ban" <mailargs> <dest>
date +%%s > <tmpfile>.lastsent
fi
rm -f <tmpfile>.buffer <tmpfile>.first
# Option: actioncheck
# Notes.: command executed once before each actionban command
# Values: CMD
#
actioncheck =
# Option: actionban
# Notes.: command executed when banning an IP. Take care that the
# command is executed with Fail2Ban user rights.
# Tags: See jail.conf(5) man page
# Values: CMD
#
# See http://www.dshield.org/specs.html for more on report format/notes
#
# Note: We are currently using <time> for the timestamp because no tag is
# available to indicate the timestamp of the log message(s) which triggered the
# ban. Therefore the timestamps we are using in the report, whilst often only a
# few seconds out, are incorrect. See
# http://sourceforge.net/tracker/index.php?func=detail&aid=2017795&group_id=121032&atid=689047
#
actionban = TZONE=`date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'`
DATETIME="`perl -e '@t=localtime(<time>);printf "%%4d-%%02d-%%02d %%02d:%%02d:%%02d",1900+$t[5],$t[4]+1,$t[3],$t[2],$t[1],$t[0]'` $TZONE"
PROTOCOL=`awk '{IGNORECASE=1;if($1=="<protocol>"){print $2;exit}}' /etc/protocols`
if [ -z "$PROTOCOL" ]; then PROTOCOL=<protocol>; fi
printf %%b "$DATETIME\t<userid>\t<failures>\t<ip>\t<srcport>\t<myip>\t<port>\t$PROTOCOL\t<tcpflags>\n" >> <tmpfile>.buffer
NOW=`date +%%s`
if [ ! -f <tmpfile>.first ]; then
echo <time> | cut -d. -f1 > <tmpfile>.first
fi
if [ ! -f <tmpfile>.lastsent ]; then
echo 0 > <tmpfile>.lastsent
fi
LOGAGE=$(($NOW - `cat <tmpfile>.first`))
LASTREPORT=$(($NOW - `cat <tmpfile>.lastsent`))
LINES=$( wc -l <tmpfile>.buffer | awk '{ print $1 }' )
if [ $LINES -ge <lines> && $LASTREPORT -gt <minreportinterval> ] || [ $LOGAGE -gt <maxbufferage> ]; then
cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ $TZONE Fail2Ban" <mailargs> <dest>
rm -f <tmpfile>.buffer <tmpfile>.first
echo $NOW > <tmpfile>.lastsent
fi
# Option: actionunban
# Notes.: command executed when unbanning an IP. Take care that the
# command is executed with Fail2Ban user rights.
# Tags: See jail.conf(5) man page
# Values: CMD
#
actionunban = if [ -f <tmpfile>.first ]; then
NOW=`date +%%s`
LOGAGE=$(($NOW - `cat <tmpfile>.first`))
if [ $LOGAGE -gt <maxbufferage> ]; then
cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ `date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'` Fail2Ban" <mailargs> <dest>
rm -f <tmpfile>.buffer <tmpfile>.first
echo $NOW > <tmpfile>.lastsent
fi
fi
[Init]
# Option: port
# Notes.: The target port for the attack (numerical). MUST be provided in the
# jail config, as it cannot be detected here.
# Values: [ NUM ]
#
port = ???
# Option: userid
# Notes.: Your DShield user ID. Should be provided either in the jail config or
# in a .local file.
# Register at https://secure.dshield.org/register.html
# Values: [ NUM ]
#
userid = 0
# Option: myip
# Notes.: The target IP for the attack (your public IP). Should be provided
# either in the jail config or in a .local file unless your PUBLIC IP
# is the first IP assigned to eth0
# Values: [ an IP address ] Default: Tries to find the IP address of eth0,
# which in most cases will be a private IP, and therefore incorrect
#
myip = `ip -4 addr show dev eth0 | grep inet | head -n 1 | sed -r 's/.*inet ([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}).*/\1/'`
# Option: protocol
# Notes.: The protocol over which the attack is happening
# Values: [ tcp | udp | icmp | (any other protocol name from /etc/protocols) | NUM ] Default: tcp
#
protocol = tcp
# Option: lines
# Notes.: How many lines to buffer before making a report. Regardless of this,
# reports are sent a minimum of <minreportinterval> apart, or if the
# buffer contains an event over <maxbufferage> old, or on shutdown
# Values: [ NUM ]
#
lines = 50
# Option: minreportinterval
# Notes.: Minimum period (in seconds) that must elapse before we submit another
# batch of reports. DShield request a minimum of 1 hour (3600 secs)
# between reports.
# Values: [ NUM ]
#
minreportinterval = 3600
# Option: maxbufferage
# Notes.: Maximum age (in seconds) of the oldest report in the buffer before we
# submit the batch, even if we haven't reached <lines> yet. Note that
# this is only checked on each ban/unban, and that we always send
# anything in the buffer on shutdown. Must be greater than
# Values: [ NUM ]
#
maxbufferage = 21600
# Option: srcport
# Notes.: The source port of the attack. You're unlikely to have this info, so
# you can leave the default
# Values: [ NUM ]
#
srcport = ???
# Option: tcpflags
# Notes.: TCP flags on attack. You're unlikely to have this info, so you can
# leave empty
# Values: [ STRING ]
#
tcpflags =
# Option: mailcmd
# Notes.: Your system mail command. Is passed 2 args: subject and recipient
# Values: CMD
#
mailcmd = mail -E 'set escape' -s
# Option: mailargs
# Notes.: Additional arguments to mail command. e.g. for standard Unix mail:
# CC reports to another address:
# -c me@example.com
# Appear to come from a different address (the From address must match
# the one configured at DShield - the '--' indicates arguments to be
# passed to Sendmail):
# -- -f me@example.com
# Values: [ STRING ]
#
mailargs =
# Option: dest
# Notes.: Destination e-mail address for reports
# Values: [ STRING ]
#
dest = reports@dshield.org
# Option: tmpfile
# Notes.: Base name of temporary files used for buffering
# Values: [ STRING ]
#
tmpfile = /var/run/fail2ban/tmp-dshield