From 716ec37430df85e81bbc4ed0c163e864e73d4ff6 Mon Sep 17 00:00:00 2001 From: Joshua Dye Date: Tue, 23 Oct 2018 11:14:33 -0400 Subject: [PATCH] committing changes in /etc after apt run Package changes: +at 3.1.23-1 armhf +autoconf 2.69-11 all +automake 1:1.16.1-1.1 all +autopoint 0.19.8.1-8 all +autotools-dev 20180224.1 all +dctrl-tools 2.24-3 armhf +debhelper 11.4.1 all +debian-keyring 2018.09.30 all +devscripts 2.18.6 armhf +dh-autoreconf 19 all +dh-strip-nondeterminism 0.043-2 all +diffstat 1.61-1 armhf +dput 1.0.2 all +dwz 0.12-2 armhf +equivs 2.1.0 all +gettext 0.19.8.1-8 armhf +intltool-debian 0.35.0+20060710.4 all +libapt-pkg-perl 0.1.34 armhf +libarchive-cpio-perl 0.10-1 all +libarchive-zip-perl 1.64-1 all +libb-hooks-endofscope-perl 0.24-1 all +libb-hooks-op-check-perl 0.22-1 armhf +libcgi-fast-perl 1:2.13-1 all +libcgi-pm-perl 4.40-1 all +libclass-accessor-perl 0.51-1 all +libclass-inspector-perl 1.32-1 all +libclass-method-modifiers-perl 2.12-1 all +libclass-xsaccessor-perl 1.19-3 armhf +libclone-perl 0.39-1 armhf +libconvert-binhex-perl 1.125-1 all +libdata-optlist-perl 0.110-1 all +libdevel-callchecker-perl 0.007-2+b1 armhf +libdevel-globaldestruction-perl 0.14-1 all +libdigest-bubblebabble-perl 0.02-2 all +libdigest-hmac-perl 1.03+dfsg-2 all +libdistro-info-perl 0.20 all +libdynaloader-functions-perl 0.003-1 all +libemail-valid-perl 1.202-1 all +libexporter-tiny-perl 1.002001-1 all +libfcgi-perl 0.78-2+b1 armhf +libfile-chdir-perl 0.1008-1 all +libfile-stripnondeterminism-perl 0.043-2 all +libfl2 2.6.4-6.2 armhf +libgetopt-long-descriptive-perl 0.103-2 all +libgit-wrapper-perl 0.048-1 all +libgpgme11 1.12.0-4 armhf +libimport-into-perl 1.002005-1 all +libio-sessiondata-perl 1.03-1 all +libio-string-perl 1.08-3 all +libipc-run-perl 20180523.0-1 all +liblist-compare-perl 0.53-1 all +liblist-moreutils-perl 0.416-1+b2 armhf +libltdl-dev 2.4.6-6 armhf +libltdl7 2.4.6-6 armhf +libmail-sendmail-perl 0.80-1 all +libmime-tools-perl 5.509-1 all +libmodule-implementation-perl 0.09-1 all +libmodule-runtime-perl 0.016-1 all +libmoo-perl 2.003004-1 all +libnamespace-clean-perl 0.27-1 all +libnet-dns-perl 1.17-1 all +libnet-dns-sec-perl 1.09-1 armhf +libnet-domain-tld-perl 1.75-1 all +libnet-ip-perl 1.26-2 all +libnet-libidn-perl 0.12.ds-3 armhf +libnumber-compare-perl 0.03-1 all +libnumber-range-perl 0.12-1 all +libossp-uuid-perl 1.6.2-1.5+b4 armhf +libossp-uuid16 1.6.2-1.5+b4 armhf +libpackage-stash-perl 0.37-1 all +libpackage-stash-xs-perl 0.28-3+b2 armhf +libparams-classify-perl 0.015-1 armhf +libparams-util-perl 1.07-3+b2 armhf +libparams-validate-perl 1.29-1 armhf +libparse-debianchangelog-perl 1.2.0-12 all +libpath-iterator-rule-perl 1.014-1 all +libpath-tiny-perl 0.104-2 all +libperlio-gzip-perl 0.19-1+b3 armhf +libpod-constants-perl 0.19-1 all +libregexp-pattern-license-perl 3.0.31-3 all +librole-tiny-perl 2.000006-1 all +libsoap-lite-perl 1.27-1 all +libsort-key-perl 1.33-2 armhf +libsort-versions-perl 1.62-1 all +libstrictures-perl 2.000005-1 all +libstring-copyright-perl 0.003005-1 all +libstring-escape-perl 2010.002-2 all +libstring-shellquote-perl 1.04-1 all +libsub-exporter-perl 0.987-1 all +libsub-exporter-progressive-perl 0.001013-1 all +libsub-identify-perl 0.14-1 armhf +libsub-install-perl 0.928-1 all +libsub-name-perl 0.21-1+b1 armhf +libsub-quote-perl 2.005001-1 all +libsys-hostname-long-perl 1.5-1 all +libtask-weaken-perl 1.06-1 all +libtext-glob-perl 0.10-1 all +libtext-levenshtein-perl 0.13-1 all +libtool 2.4.6-6 all +libunicode-utf8-perl 0.60-1+b4 armhf +libvariable-magic-perl 0.62-1 armhf +libxml-libxml-perl 2.0132+dfsg-2 armhf +libxml-namespacesupport-perl 1.12-1 all +libxml-sax-base-perl 1.09-1 all +libxml-sax-expat-perl 0.51-1 all +libxml-sax-perl 1.00+dfsg-1 all +libxml-simple-perl 2.25-1 all +libxmlrpc-lite-perl 0.717-1 all +libyaml-libyaml-perl 0.74+repack-1 armhf +licensecheck 3.0.31-2 all +lintian 2.5.109 all +m4 1.4.18-1 armhf +patchutils 0.3.4-2 armhf +po-debconf 1.0.20 all +python3-gpg 1.12.0-4 armhf +python3-unidiff 0.5.4-1 all +t1utils 1.41-2 armhf +wdiff 1.2.2-2 armhf --- .etckeeper | 12 + alternatives/aclocal | 1 + alternatives/aclocal.1.gz | 1 + alternatives/automake | 1 + alternatives/automake.1.gz | 1 + at.deny | 24 + cowpoke.conf | 133 ++++ devscripts.conf | 634 ++++++++++++++++++ dput.cf | 108 +++ emacs/site-start.d/50autoconf.el | 17 + init.d/atd | 48 ++ lintianrc | 51 ++ pam.d/atd | 10 + perl/XML/SAX/ParserDetails.ini | 18 + rc0.d/K01atd | 1 + rc1.d/K01atd | 1 + rc2.d/S01atd | 1 + rc3.d/S01atd | 1 + rc4.d/S01atd | 1 + rc5.d/S01atd | 1 + rc6.d/K01atd | 1 + .../multi-user.target.wants/atd.service | 1 + 22 files changed, 1067 insertions(+) create mode 120000 alternatives/aclocal create mode 120000 alternatives/aclocal.1.gz create mode 120000 alternatives/automake create mode 120000 alternatives/automake.1.gz create mode 100644 at.deny create mode 100644 cowpoke.conf create mode 100644 devscripts.conf create mode 100644 dput.cf create mode 100644 emacs/site-start.d/50autoconf.el create mode 100755 init.d/atd create mode 100644 lintianrc create mode 100644 pam.d/atd create mode 100644 perl/XML/SAX/ParserDetails.ini create mode 120000 rc0.d/K01atd create mode 120000 rc1.d/K01atd create mode 120000 rc2.d/S01atd create mode 120000 rc3.d/S01atd create mode 120000 rc4.d/S01atd create mode 120000 rc5.d/S01atd create mode 120000 rc6.d/K01atd create mode 120000 systemd/system/multi-user.target.wants/atd.service diff --git a/.etckeeper b/.etckeeper index 881b0ae8..a1c10029 100755 --- a/.etckeeper +++ b/.etckeeper @@ -115,6 +115,8 @@ maybe chmod 0644 'apt/sources.list.d/my.list' maybe chmod 0644 'apt/sources.list.d/raspi.list' maybe chmod 0644 'apt/trusted.gpg' maybe chmod 0755 'apt/trusted.gpg.d' +maybe chgrp 'daemon' 'at.deny' +maybe chmod 0640 'at.deny' maybe chmod 0755 'avahi' maybe chmod 0644 'avahi/avahi-daemon.conf' maybe chmod 0644 'avahi/hosts' @@ -208,6 +210,7 @@ maybe chmod 0644 'console-setup/compose.KOI8-U.inc' maybe chmod 0644 'console-setup/compose.TIS-620.inc' maybe chmod 0644 'console-setup/compose.VISCII.inc' maybe chmod 0644 'console-setup/remap.inc' +maybe chmod 0644 'cowpoke.conf' maybe chmod 0755 'cron.d' maybe chmod 0644 'cron.d/.placeholder' maybe chmod 0644 'cron.d/certbot' @@ -276,6 +279,7 @@ maybe chmod 0644 'default/ssh' maybe chmod 0644 'default/triggerhappy' maybe chmod 0644 'default/useradd' maybe chmod 0644 'deluser.conf' +maybe chmod 0644 'devscripts.conf' maybe chmod 0755 'dhcp' maybe chmod 0755 'dhcp/.git' maybe chmod 0644 'dhcp/.git/COMMIT_EDITMSG' @@ -416,10 +420,12 @@ maybe chmod 0644 'dpkg/origins/debian' maybe chmod 0644 'dpkg/origins/raspbian' maybe chmod 0644 'dpkg/shlibs.default' maybe chmod 0644 'dpkg/shlibs.override' +maybe chmod 0644 'dput.cf' maybe chmod 0644 'drirc' maybe chmod 0755 'elinks' maybe chmod 0755 'emacs' maybe chmod 0755 'emacs/site-start.d' +maybe chmod 0644 'emacs/site-start.d/50autoconf.el' maybe chmod 0644 'emacs/site-start.d/50cmake-data.el' maybe chmod 0644 'emacs/site-start.d/50figlet.el' maybe chmod 0644 'email-addresses' @@ -742,6 +748,7 @@ maybe chmod 0755 'ifplugd/action.d' maybe chmod 0755 'init' maybe chmod 0755 'init.d' maybe chmod 0755 'init.d/alsa-utils' +maybe chmod 0755 'init.d/atd' maybe chmod 0755 'init.d/avahi-daemon' maybe chmod 0755 'init.d/bind9' maybe chmod 0755 'init.d/bluetooth' @@ -1884,6 +1891,7 @@ maybe chmod 0755 'lighttpd' maybe chmod 0755 'lighttpd/conf-available' maybe chmod 0644 'lighttpd/conf-available/90-javascript-alias.conf' maybe chmod 0755 'lighttpd/conf-enabled' +maybe chmod 0644 'lintianrc' maybe chmod 0644 'locale.alias' maybe chmod 0644 'locale.gen' maybe chmod 0755 'logcheck' @@ -1985,6 +1993,7 @@ maybe chmod 0644 'openal/alsoft.conf' maybe chmod 0755 'opt' maybe chmod 0644 'pam.conf' maybe chmod 0755 'pam.d' +maybe chmod 0644 'pam.d/atd' maybe chmod 0644 'pam.d/chfn' maybe chmod 0644 'pam.d/chpasswd' maybe chmod 0644 'pam.d/chsh' @@ -2013,6 +2022,9 @@ maybe chmod 0755 'perl' maybe chmod 0755 'perl/CPAN' maybe chmod 0755 'perl/Net' maybe chmod 0644 'perl/Net/libnet.cfg' +maybe chmod 0755 'perl/XML' +maybe chmod 0755 'perl/XML/SAX' +maybe chmod 0644 'perl/XML/SAX/ParserDetails.ini' maybe chmod 0644 'pip.conf' maybe chmod 0755 'plymouth' maybe chmod 0644 'plymouth/plymouthd.conf' diff --git a/alternatives/aclocal b/alternatives/aclocal new file mode 120000 index 00000000..ab5fbaff --- /dev/null +++ b/alternatives/aclocal @@ -0,0 +1 @@ +/usr/bin/aclocal-1.16 \ No newline at end of file diff --git a/alternatives/aclocal.1.gz b/alternatives/aclocal.1.gz new file mode 120000 index 00000000..f102ed65 --- /dev/null +++ b/alternatives/aclocal.1.gz @@ -0,0 +1 @@ +/usr/share/man/man1/aclocal-1.16.1.gz \ No newline at end of file diff --git a/alternatives/automake b/alternatives/automake new file mode 120000 index 00000000..a64f2984 --- /dev/null +++ b/alternatives/automake @@ -0,0 +1 @@ +/usr/bin/automake-1.16 \ No newline at end of file diff --git a/alternatives/automake.1.gz b/alternatives/automake.1.gz new file mode 120000 index 00000000..68ed1772 --- /dev/null +++ b/alternatives/automake.1.gz @@ -0,0 +1 @@ +/usr/share/man/man1/automake-1.16.1.gz \ No newline at end of file diff --git a/at.deny b/at.deny new file mode 100644 index 00000000..0d5a3826 --- /dev/null +++ b/at.deny @@ -0,0 +1,24 @@ +alias +backup +bin +daemon +ftp +games +gnats +guest +irc +lp +mail +man +nobody +operator +proxy +qmaild +qmaill +qmailp +qmailq +qmailr +qmails +sync +sys +www-data diff --git a/cowpoke.conf b/cowpoke.conf new file mode 100644 index 00000000..85ae0a68 --- /dev/null +++ b/cowpoke.conf @@ -0,0 +1,133 @@ +# System configuration file for cowpoke +# This file is sourced as a bash shell script, see cowpoke(1) for more details. + +# Global defaults +# These apply to every arch and dist in a single cowpoke invocation. +# ------------------------------------------------------------------ + +# The hostname of the machine where cowbuilder is installed +# eg. BUILDD_HOST="buildd.your.org" +BUILDD_HOST= + +# The username for unprivileged operations on BUILDD_HOST +# If unset the user that invoked cowpoke will be assumed, or the user that +# is configured for the BUILDD_HOST in your ssh config will be used. +#BUILDD_USER= + +# The Debian architecture(s) to build for. A space separated list of +# architectures may be used here to build for all of them in a single pass. +#BUILDD_ARCH="$(dpkg-architecture -qDEB_BUILD_ARCH 2>/dev/null)" + +# The Debian distro to build for. A space separated list of distros may be +# used here to build for all of them in a single pass. +#BUILDD_DIST="unstable" + +# The directory (under BUILDD_USER's home if relative) to upload packages +# for building and where build logs and the result of post-build checks will +# be placed +#INCOMING_DIR="cowbuilder-incoming" + +# The filesystem root for all pbuilder COW and result files. Arch and dist +# specific subdirectories normally will be created under this. The apt cache +# and temporary build directory will also be located under this path. +#PBUILDER_BASE="/var/cache/pbuilder" + +# The gpg key id to pass to debsign's -k option. eg. SIGN_KEYID="0x12345678" +# Leave this unset if you do not wish to sign packages built in this way. +#SIGN_KEYID= + +# The 'host' alias to pass to dput. eg. UPLOAD_QUEUE="ftp-master" +# Leave this unset if you do not wish to upload packages built this way. +# This option will be ignored if SIGN_KEYID is unset. +#UPLOAD_QUEUE= + +# The command to use to gain root privileges on the remote build machine. +# This is only required to invoke cowbuilder and allow it to enter its chroot, +# so you may restrict this user to only being able to run that command with +# escalated privileges. Something like this in sudoers will enable invoking +# cowbuilder without an additional password entry required: +# youruser ALL = NOPASSWD: /usr/sbin/cowbuilder +# Alternatively you could use ssh with a forwarded key, or whatever other +# mechanism suits your local access policy. su -c isn't really suitable +# here due to its quoting requirements being different from all the rest. +#BUILDD_ROOTCMD="sudo" + +# The utility to use when creating a new build root. Alternatives are +# debootstrap or cdebootstrap. +#DEBOOTSTRAP="cdebootstrap" + +# If set, package files resulting from the build will be copied to the path +# (local or remote) that this is set to, after the build completes. It is +# unset by default and can be overridden with --return or --no-return. +# The given path must exist, it will not be created. +#RETURN_DIR="." + +# ============================================================================= +# +# Arch and dist specific options +# These are variables of the form: $arch_$dist_VAR, which apply only for a +# particular target arch/dist build. The following variables are supported: +# +# $arch_$dist_RESULT_DIR - The directory where pbuilder/cowbuilder will place +# the built package, and where any previously built +# packages may be found for comparison using debdiff +# after building. +# +# $arch_$dist_BASE_PATH - The directory where the COW master files are found. +# +# $arch_$dist_BASE_DIST - The code name to pass as the --distribution option +# for cowbuilder instead of $dist. This is necessary +# when $dist is a locally significant name assigned +# to some specially configured build chroot, such as +# 'wheezy_backports', and not the formal suite name +# of a distro release known to debootstrap. +# +# $arch_$dist_CREATE_OPTS - A bash array containing additional options to pass +# verbatim to cowbuilder when this chroot is created +# for the first time (using the --create option). +# This is useful when options like --othermirror are +# wanted to create specialised chroot configurations +# such as 'wheezy_backports'. +# +# $arch_$dist_UPDATE_OPTS - A bash array containing additional options to pass +# verbatim to cowbuilder each time the base of this +# chroot is updated. +# +# $arch_$dist_BUILD_OPTS - A bash array containing additional options to pass +# verbatim to cowbuilder each time a package build is +# performed in this chroot. This is useful when you +# want to use some option like --twice which cowpoke +# does not directly need to care about. +# +# Each element in these arrays corresponds to a single argument (in the ARGV +# sense) that will be passed to cowbuilder. This ensures that arguments which +# may contain whitespace or have strange quoting requirements or other special +# characters will not be mangled before they get to cowbuilder. +# +# Bash arrays are initialised using the following form: +# VARIABLE=( "arg1" "arg 2" "--option" "value" "--opt=val" "etc. etc." ) +# +# +# $arch_$dist_SIGN_KEYID - An optional arch and dist specific override for +# the global SIGN_KEYID option. +# +# $arch_$dist_UPLOAD_QUEUE - An optional arch and dist specific override for +# the global UPLOAD_QUEUE option. +# +# ----------------------------------------------------------------------------- + +#amd64_unstable_RESULT_DIR="$PBUILDER_BASE/amd64/unstable/result" +#amd64_unstable_BASE_PATH="$PBUILDER_BASE/amd64/unstable/base.cow" + +#amd64_experimental_RESULT_DIR="$PBUILDER_BASE/amd64/experimental/result" +#amd64_experimental_BASE_PATH="$PBUILDER_BASE/amd64/experimental/base.cow" + +#i386_unstable_RESULT_DIR="$PBUILDER_BASE/i386/unstable/result" +#i386_unstable_BASE_PATH="$PBUILDER_BASE/i386/unstable/base.cow" + +#i386_experimental_RESULT_DIR="$PBUILDER_BASE/i386/experimental/result" +#i386_experimental_BASE_PATH="$PBUILDER_BASE/i386/experimental/base.cow" + +#amd64_wheezy_bpo_BASE_DIST="wheezy" +#amd64_wheezy_bpo_CREATE_OPTS=(--othermirror "deb http://deb.debian.org/debian wheezy-backports main") + diff --git a/devscripts.conf b/devscripts.conf new file mode 100644 index 00000000..c8ca060a --- /dev/null +++ b/devscripts.conf @@ -0,0 +1,634 @@ +# This configuration file gives defaults for the scripts in +# the devscripts package, as documented in the individual manpages. +# Variables defined here may be overridden by a per-user ~/.devscripts +# configuration file, which has exactly the same syntax as this file. +# +# This file is sourced by /bin/bash, and should only contain +# comment lines (beginning with a '#'), and lines of the form +# VARIABLE=value +# The value must be quoted if there are spaces in it. +# Variables corresponding to switches (on/off; yes/no) must take +# one of the values 'yes' or 'no'. +# The variable names are all of the form PROGNAME_VARNAME, +# or DEVSCRIPTS_VARNAME if they are more generally applicable. +# +# As new variables are introduced into the devscripts program, their +# descriptions and default values will be appended as comments +# to this file. + +# Variables recognised as of devscripts version 2.18.6: + +##### Package-wide variables +# +# Lists of which scripts are affected by these package-wide variables +# can be found in the devscripts.conf(5) manpage. +# +# +# Directory Name Checking +# +# Several programs check the directory name and refuse to function if +# it does not match the name of the package being worked on. (The +# details are described in the individual manpages.) +# These two variables control this behaviour, corresponding to the +# --check-dirname-level and --check-dirname-regex command line options. +# The possible values of DEVSCRIPTS_CHECK_DIRNAME_LEVEL are: +# 0 never check the directory name +# 1 check the directory name only if the program has changed directory +# 2 always check the directory name +# The variable DEVSCRIPTS_DIRNAME_REGEXP is a Perl regex which +# defines what is considered a valid directory name for the source +# package PACKAGE; if it includes a '/', then it must match the full +# directory path, otherwise it must match the full directory name. +# +# The default settings are: +# DEVSCRIPTS_CHECK_DIRNAME_LEVEL=1 +# DEVSCRIPTS_CHECK_DIRNAME_REGEX='PACKAGE(-.+)?' + +##### annotate-output +# +# No variables currently + +##### archpath +# +# No variables currently + +##### bts +# +# Default bts show/bugs to run in offline mode? +# BTS_OFFLINE=no +# +# Cache all visited bug reports once a cache has been established +# for the first time? +# BTS_CACHE=yes +# +# How much to mirror when caching? The minimal amount (min), the mbox +# version as well (mbox) or the whole works (full)? +# BTS_CACHE_MODE=min +# +# Always refresh the cache, even if nothing's changed? +# BTS_FORCE_REFRESH=no +# +# How do we read an mbox? This will be split on whitespace, then +# %s is replaced by the mbox name and %% by a single %. +# BTS_MAIL_READER='mutt -f %s' +# +# What sendmail command do we use? This will be split on whitespace. +# BTS_SENDMAIL_COMMAND='/usr/sbin/sendmail' +# +# Download only new bugs when caching? If set to yes, don't check for +# updates in bugs we already have. +# BTS_ONLY_NEW=no +# +# Which SMTP host should be used? Note that if both an SMTP host and +# sendmail command are specified in the configuration file(s), the SMTP +# host will be used unless overridden by --sendmail on the command line +# BTS_SMTP_HOST=reportbug.debian.org +# +# If the SMTP host specified above requires authentication, the following +# options may be used to specify the username and password to use. +# If only a username is provided then the password will be prompted for +# before sending the e-mail +# BTS_SMTP_AUTH_USERNAME=user +# BTS_SMTP_AUTH_PASSWORD=pass +# +# Specify a HELO to use when connecting to the SMTP host. If not supplied +# and the file /etc/mailname exists, its contents will be used as the HELO +# BTS_SMTP_HELO=foo.example.com +# +# Include resolved bugs when caching? +# BTS_INCLUDE_RESOLVED=yes +# +# Suppress BTS acknowledgment e-mails (ignored by the control bot) +# BTS_SUPPRESS_ACKS=no +# +# Allow the generated message to be edited and, if necessary, abandoned +# before sending it to the control bot? +# +# If set to yes, prompt for confirmation / edit / abandonment. +# If set to force, spawn an editor and then proceed as if set to yes +# BTS_INTERACTIVE=no +# +# Specify a list of e-mail addresses to which a carbon copy of the +# generated e-mail to the control bot should automatically be sent. +# BTS_DEFAULT_CC=example@example.com +# +# Which debbugs server should be used? +# BTS_SERVER=https://bugs.debian.org + +##### chdist +# +# No variables currently + +##### checkbashisms +# +# No variables currently + +##### cowpoke +# +# No variables currently; see cowpoke.conf and cowpoke(1) + +##### cvs-debc +# +# No variables currently + +##### cvs-debi +# +# No variables currently + +##### cvs-debrelease +# +# No variables currently + +##### cvs-debuild +# +# No variables currently + +##### dd-list +# +# No variables currently + +##### dcmd +# +# No variables currently + +##### dcontrol +# +# URL to query +# DCONTROL_URL="https://qa.debian.org/cgi-bin/dcontrol" + +##### debc +# +# debc recognises the DEBRELEASE_DEBS_DIR variable; see debrelease +# below for more information. + +##### deb-reversion +# +# No variables currently + +##### debchange/dch +# +# Preserve the source tree dirname if the upstream version changes? +# DEBCHANGE_PRESERVE=no +# +# Query the BTS when --closes is being used? +# DEBCHANGE_QUERY_BTS=yes +# +# Select a heuristic to use to determine whether the package has released. +# See the debchange man page for details. +# DEBCHANGE_RELEASE_HEURISTIC=log +# DEBCHANGE_RELEASE_HEURISTIC=changelog +# +# Introduce multiple-maintainer markers in changelog sections? +# DEBCHANGE_MULTIMAINT=yes +# +# When appending to a multiple-maintainer changelog, if there are +# existing changes made by the current maintainer, should new +# changelog entries be appended to the existing entries? +# DEBCHANGE_MULTIMAINT_MERGE=no +# +# When appending entries to the changelog, should the trailer line +# be maintained as-is? +# DEBCHANGE_MAINTTRAILER=yes +# +# Use a fixed timezone in changelog entries? +# DEBCHANGE_TZ=UTC +# +# Allow a new version to be lower than the current package version +# if the new version matches the specified regular expression +# DEBCHANGE_LOWER_VERSION_PATTERN=bpo +# +# Attempt to automatically determine whether the current changelog +# stanza represents an NMU? +# DEBCHANGE_AUTO_NMU=yes +# +# When --release was used and an editor presented, force the changelog +# to be explicitly saved in the editor? If this is set to "no" then +# the changes made by --release will be automatically saved. +# DEBCHANGE_FORCE_SAVE_ON_RELEASE=yes + +##### debcheckout +# +# List of space-separated pairs REGEXP/REPLACEMENT_TEXT to define +# custom rules to enable authenticated mode. +# DEBCHECKOUT_AUTH_URLS='' +# +# For debian-dir-only repositories, also retrieve the source +# package, unpack it, and move the missing files over. +# DEBCHECKOUT_SOURCE=auto +# +# Username for authenticated mode, can be overridden with -u|--user. +# DEBCHECKOUT_USER='' +# +# See debcheckout(1) for a more precise description of syntax and +# semantics of these settings. + +##### debclean +# +# Remove .deb, .changes, .dsc and .upload files? +# DEBCLEAN_CLEANDEBS=no + +##### debcommit +# +# Strip a leading "* " from commit messages taken from changelogs? +# DEBCOMMIT_STRIP_MESSAGE=yes +# +# Sign created tags using gnupg? +# DEBCOMMIT_SIGN_TAGS=no +# +# Take any uncommitted changes in the changelog in +# to account when determining the commit message +# for a release? +# DEBCOMMIT_RELEASE_USE_CHANGELOG=no +# +# Sign commits using gnupg? +# DEBCOMMIT_SIGN_COMMITS=no + +##### debdiff +# +# Show directory names which appear in the filelist? +# DEBDIFF_DIRS=no +# +# Compare control files? +# DEBDIFF_CONTROL=yes +# +# Which control files to compare? A comma-separated list, with +# possibilities such as postinst, config and so on; ALL means compare +# all control files. +# DEBDIFF_CONTROLFILES=control +# +# Show files which have moved between .debs? +# DEBDIFF_SHOW_MOVED=no +# +# Option to pass to wdiff +# DEBDIFF_WDIFF_OPT= +# +# Include the output of diffstat? +# DEBDIFF_SHOW_DIFFSTAT=no +# +# Compare control files in source packages using wdiff? +# DEBDIFF_WDIFF_SOURCE_CONTROL=no +# +# Always compare package in version order, rather than the order specified +# on the command line? +# DEBDIFF_AUTO_VER_SORT=no +# +# Unpack tarballs found in the top level source directory. +# DEBDIFF_UNPACK_TARBALLS=yes + +##### debdiff-apply +# +# No variables currently + +##### debi +# +# debc recognises the DEBRELEASE_DEBS_DIR variable; see debrelease +# below for more information. + +##### debpkg +# +# No variables currently + +##### debrelease +# +# This specifies which uploader program to use. As of devscripts 2.18.6 +# the recognised values are "dupload" (default) and "dput". Check the +# debrelease(1) manpage for any recent changes to this variable +# DEBRELEASE_UPLOADER=dupload +# +# This specifies the directory, relative to the top of the source +# tree, in which the .changes and .debs files are to be found. Note +# that this also affects debc and debi. +# DEBRELEASE_DEBS_DIR=.. + +##### debrsign +# +# No variables currently + +##### debsign +# +# debsign recognises the DEBRELEASE_DEBS_DIR variable; see debrelease +# above for more information. +# +# Always re-sign files even if they are already signed, without prompting. +# DEBSIGN_ALWAYS_RESIGN=yes +# +# Which signing program to use? gpg and pgp are the usual values; the +# default is determined as described in the manpage. +# Corresponds to -p option +# DEBSIGN_PROGRAM= +# +# How the signing program works; must be either gpg or pgp as of +# devscripts version 2.18.6. The default is described in the +# manpage. Corresponds to -sgpg and -spgp. +# DEBSIGN_SIGNLIKE= +# +# Maintainer name (only used to determine GPG keyid; -m option) +# DEBSIGN_MAINT= +# +# GPG keyid to use (-k option) +# DEBSIGN_KEYID= + +##### debsnap +# +# Where to put the directory named -/ +# default: source-$package_name if unset +# DEBSNAP_DESTDIR= +# +# Verbosely show messages (yes/no) +# default: no +# DEBSNAP_VERBOSE=no +# +# The base URL of the archive to download from +# DEBSNAP_BASE_URL=https://snapshot.debian.org +# +# A sed regexp to transform pool//f/foo into the desired layout +# default: make the directory from pool//f/foo to pool/f/foo +# DEBSNAP_CLEAN_REGEX="s@\([^/]*\)/[^/]*/\(.*\)@\1/\2@" +# +# Where the Sources.gz lives, subdirectory of DEBSNAP_BASE_URL// +# default: DEBSNAP_BASE_URL//source/Sources.gz +# DEBSNAP_SOURCES_GZ_PATH=source/Sources.gz + +##### debuild +# +# Do we preserve the whole environment except for PATH? +# DEBUILD_PRESERVE_ENV=no +# +# Are there any environment variables we should preserve? This should +# be a comma-separated list. +# DEBUILD_PRESERVE_ENVVARS="" +# +# How to set a preserved environment variable, in this case to set +# FOO=bar. +# DEBUILD_SET_ENVVAR_FOO=bar +# +# Do we check for the existence of the .orig.tar.gz before calling +# dpkg-buildpackage? +# DEBUILD_TGZ_CHECK=yes +# +# Corresponds to the dpkg-buildpackage -r option. +# DEBUILD_ROOTCMD=fakeroot +# +# Extra options given to dpkg-buildpackage before any command-line +# options specified. Single options containing spaces should be +# quoted, for example "-m'Julian Gilbey ' -us -uc" +# If this contains a -r, -d or -D option, this will also be recognised +# when running debuild binary|binary-arch|... +# DEBUILD_DPKG_BUILDPACKAGE_OPTS="" +# +# Do we run lintian at the end of a full run? +# DEBUILD_LINTIAN=yes +# +# Extra options given to lintian before any command-line options +# specified. +# DEBUILD_LINTIAN_OPTS="" +# +# Colon-separated list of options to be added to the beginning +# of PATH once it has been sanitised +# DEBUILD_PREPEND_PATH="/usr/lib/ccache" +# +# Credentials to pass to debrsign when signing dsc / changes files +# Setting this option to a non-blank string implies using debrsign +# DEBUILD_SIGNING_USERNAME="user@host" +# +# Hooks; see the manpage for details of these +# DEBUILD_DPKG_BUILDPACKAGE_HOOK="" +# DEBUILD_CLEAN_HOOK="" +# DEBUILD_DPKG_SOURCE_HOOK="" +# DEBUILD_BUILD_HOOK="" +# DEBUILD_BINARY_HOOK="" +# DEBUILD_FINAL_CLEAN_HOOK="" +# DEBUILD_LINTIAN_HOOK="" +# DEBUILD_SIGNING_HOOK="" +# DEBUILD_POST_DPKG_BUILDPACKAGE_HOOK="" + +##### dget +# +# Extra directories to search for files in addition to +# /var/cache/apt/archives. This is a colon-separated list of directories. +# DGET_PATH="" +# +# Unpack downloaded source packages +# DGET_UNPACK=yes +# +# Verify source package signatures using dscverify +# DGET_VERIFY=yes + +##### diff2patches +# +# No variables currently + +##### dpkg-depcheck +# +# Extra options given to dpkg-depcheck before any command-line +# options specified. For example: "-b --features=-catch-alternatives" +# DPKG_DEPCHECK_OPTIONS="" + +##### dpkg-genbuilddeps +# +# No variables currently + +##### dpkg-sig +# +# dpkg-sig is not a part of devscripts, but shares this configuration file. +# It pays attention to the values of DEBSIGN_MAINT and DEBSIGN_KEY in +# addition to the following. +# +# This key ID takes precedence over the rest +# DPKGSIG_KEYID= +# +# Do we sign the .changes and .dsc files? See the manpage for more +# info. Valid options are no, auto, yes, full and force_full. +# DPKGSIG_SIGN_CHANGES=auto +# +# Do we cache the gpg passphrase by default? This can be dangerous! +# DPKGSIG_CACHE_PASS=no + +##### dscverify +# +# A colon separated list of extra keyrings to read. +# DSCVERIFY_KEYRINGS="" + +##### getbuildlog +# +# No variables currently + +##### grep-excuses +# +# This specifies a default maintainer name or email to hunt for +# GREP_EXCUSES_MAINTAINER="" +# +# Is this running on ftp-master.debian.org? If so, we use the local +# excuses file +# GREP_EXCUSES_FTP_MASTER=no + +##### list-unreleased +# +# No variables currently + +##### mergechanges +# +# No variables currently + +##### manpage-alert +# +# No variables currently + +##### mass-bug +# +# No variables currently + +#### mk-build-deps +# +# Which tool to use for installing build depends? +# MKBUILDDEPS_TOOL="/usr/bin/apt-get --no-install-recommends" +# +# Remove package files after install? +# MKBUILDDEPS_REMOVE_AFTER_INSTALL=yes +# +# Tool used to gain root privileges to install the deb +# MKBUILDDEPS_ROOTCMD='' + +##### namecheck +# +# No variables currently; see .namecheckrc + +##### nmudiff +# +# Number of days to indicate that an NMU upload has been delayed by +# using the DELAYED upload queue. 0 indicates no delay. +# Defaults to "XX" which adds a placeholder to the e-mail. +# NMUDIFF_DELAY=3 +# +# Should we use mutt to edit and send the message or just a plain old +# editor? +# NMUDIFF_MUTT=yes +# +# Should we always submit a new report (yes), always send to the bugs +# which are being closed (no), or send to the bug being closed if +# there is only one of them, otherwise send a new report (maybe)? +# NMUDIFF_NEWREPORT=maybe +# +# nmudiff also uses the value of BTS_SENDMAIL_COMMAND if NMUDIFF_MUTT=no + +##### plotchangelog +# +# Command line options to use (space separated). None of the options +# should contain spaces. Use the PLOTCHANGELOG_GNUPLOT variable for +# the --gnuplot command line option. +# PLOTCHANGELOG_OPTIONS="" +# +# Here we can give gnuplot options. Any command line --gnuplot +# commands will be appended to these. +# PLOTCHANGELOG_GNUPLOT="" + +##### pts-subscribe +# +# How long will we subscribe for by default? The default is 30 days. +# Setting this to 'forever' means that no unsubscription request will +# be scheduled. +# PTS_UNTIL='now + 30 days' + +##### rc-alert +# +# No variables currently + +##### rmadison +# +# Add a custom URL to the default list of shorthands so one +# can use it with -u without having to specify the full URL +# +# RMADISON_URL_MAP_EXAMPLE=http://example.com/madison.cgi +# +# Default URL to use if none is specified on the command line. +# RMADISON_DEFAULT_URL=debian +# +# Default architecture to use if none is specified on the command line. +# use --architecture='*' to run an unrestricted query when +# RMADISON_ARCHITECTURE is set. +# RMADISON_ARCHITECTURE=source,i386,amd64,all + +##### svnpath +# +# No variables currently + +##### tagpending +# +# No variables currently + +##### transition-check +# +# No variables currently + +##### uscan +# +# Should we download newer upstream files we come across? +# USCAN_DOWNLOAD=yes +# +# Should we use FTP PASV mode for ftp:// links? 'default' means let +# Net::FTP(3) make the choice (primarily based on the FTP_PASSIVE +# environment variable); 'yes' and 'no' override the default +# USCAN_PASV=default +# +# Should we create a symlink from the downloaded tar.gz file to +# pkg_version.orig.tar.gz, rename it like this or do nothing? +# Options are 'symlink'/'yes', 'rename' or 'no' +# USCAN_SYMLINK=yes +# +# Should we use DEHS style output (XML format)? +# USCAN_DEHS_OUTPUT=no +# +# Should we give verbose output? +# USCAN_VERBOSE=no +# +# What user agent string should we send with requests? +# (Default is 'Debian uscan X.Y.Z') +# USCAN_USER_AGENT='' +# +# Where should downloaded files be placed? +# USCAN_DESTDIR=.. +# +# Automatically repack bzipped tar or zip archives to gzipped tars? +# USCAN_REPACK=no +# +# Use the Files-Excluded field in debian/copyright to determine whether +# the orig tarball needs to be repacked to remove non-DFSG content? +# USCAN_EXCLUSION=yes + +##### uupdate +# +# Should we retain the pristine upstream source wherever possible? +# UUPDATE_PRISTINE=yes +# +# Should we symlink the .orig.tar.gz file to its new name or +# copy it instead? yes=symlink, no=copy +# UUPDATE_SYMLINK_ORIG=yes +# +# Corresponds to the dpkg-buildpackage -r option and debuild +# DEBUILD_ROOTCMD option. Normally, this can be left empty, as then +# the debuild setting will be used. +# UUPDATE_ROOTCMD='' + +##### whodepends +# +# No variables currently + +##### who-uploads +# +# Display the date of the upload? +# WHOUPLOADS_DATE=no +# +# Maximum number of uploads to display per package +# WHOUPLOADS_MAXUPLOADS=3 +# +# Colon-separated list of keyrings to examine by default +# WHOUPLOADS_KEYRINGS=/usr/share/keyrings/debian-keyring.gpg:/usr/share/keyrings/debian-keyring.pgp:/usr/share/keyrings/debian-maintainers.gpg + +##### wnpp-alert +# +# No variables currently + +##### wnpp-check +# +# No variables currently + diff --git a/dput.cf b/dput.cf new file mode 100644 index 00000000..11f3e061 --- /dev/null +++ b/dput.cf @@ -0,0 +1,108 @@ +# Example dput.cf that defines the host that can be used +# with dput for uploading. + +[DEFAULT] +login = * +method = ftp +hash = md5 +allow_unsigned_uploads = 0 +allow_dcut = 0 +run_lintian = 0 +run_dinstall = 0 +check_version = 0 +scp_compress = 0 +post_upload_command = +pre_upload_command = +passive_ftp = 1 +default_host_main = +allowed_distributions = (?!UNRELEASED) + +[ftp-master] +fqdn = ftp.upload.debian.org +incoming = /pub/UploadQueue/ +login = anonymous +allow_dcut = 1 +method = ftp +# Please, upload your package to the proper archive +# https://www.debian.org/doc/manuals/developers-reference/pkgs.html#bug-security-upload +allowed_distributions = (?!UNRELEASED|.*-security) + +# https://lists.debian.org/debian-project/2009/05/msg00036.html +[ftp-eu] +fqdn = ftp.eu.upload.debian.org +method = ftp +incoming = /pub/UploadQueue/ +login = anonymous +allow_dcut = 1 +# Please, upload your package to the proper archive +# https://www.debian.org/doc/manuals/developers-reference/pkgs.html#bug-security-upload +allowed_distributions = (?!UNRELEASED|.*-security) + +# https://lists.debian.org/debian-devel-announce/2008/09/msg00007.html +[ssh-upload] +login = * +# login = another_username +fqdn = ssh.upload.debian.org +method = scp +incoming = /srv/upload.debian.org/UploadQueue/ +allow_dcut = 1 +# Please, upload your package to the proper archive +# https://www.debian.org/doc/manuals/developers-reference/pkgs.html#bug-security-upload +allowed_distributions = (?!UNRELEASED|.*-security) + +# And if you want to override one of the defaults, add it here. +# For example, comment out the next line +# post_upload_command = /path/to/some/script +# pre_upload_command = /path/to/some/script + +[security-master] +fqdn = ftp.security.upload.debian.org +method = ftp +incoming = /pub/SecurityUploadQueue +login = anonymous +allow_dcut = 1 +# This has been added at the request of the security team. +# Please be sure to know what you are doing before taking it out. +pre_upload_command = /usr/share/dput/helper/security-warning + +[security-master-unembargoed] +fqdn = ftp.security.upload.debian.org +method = ftp +incoming = /pub/OpenSecurityUploadQueue +login = anonymous +allow_dcut = 1 +# This has been added at the request of the security team. +# Please be sure to know what you are doing before taking it out. +pre_upload_command = /usr/share/dput/helper/security-warning + +[ubuntu] +fqdn = upload.ubuntu.com +method = ftp +incoming = / +login = anonymous + +[ppa] +fqdn = ppa.launchpad.net +method = ftp +# replace with your Launchpad ID +incoming = ~/ubuntu +login = anonymous + +[mentors] +method = ftp +fqdn = mentors.debian.net +incoming = /pub/UploadQueue +login = anonymous + +[local] +method = local +incoming = ~/public_html/debian/mini-dinstall/incoming +run_dinstall = 0 +post_upload_command = /usr/bin/mini-dinstall --batch + + +# Local variables: +# coding: utf-8 +# mode: conf +# End: +# vim: fileencoding=utf-8 filetype=config : diff --git a/emacs/site-start.d/50autoconf.el b/emacs/site-start.d/50autoconf.el new file mode 100644 index 00000000..359eaabf --- /dev/null +++ b/emacs/site-start.d/50autoconf.el @@ -0,0 +1,17 @@ +;; -*-emacs-lisp-*- +;; +;; Emacs startup file for the Debian GNU/Linux autoconf package + +(if (not (file-exists-p "/usr/share/emacs/site-lisp/autoconf")) + (message "Package autoconf removed but not purged. Skipping setup.") + ;; To avoid a dependency on emacsen for our modes and avoid having a + ;; separate autoconf-el package, we don't byte-compile the .el + ;; files, so we only need to add a source directory to load-path. + (debian-pkg-add-load-path-item + (concat "/usr/share/emacs/site-lisp/autoconf")) + + ;; autoloads for autotest-mode.el + (autoload 'autotest-mode "autotest-mode" + "Major mode for editing autotest files." t) + (setq auto-mode-alist + (cons '("\\.at\\'" . autotest-mode) auto-mode-alist))) diff --git a/init.d/atd b/init.d/atd new file mode 100755 index 00000000..2e825fc0 --- /dev/null +++ b/init.d/atd @@ -0,0 +1,48 @@ +#! /bin/sh +### BEGIN INIT INFO +# Provides: atd +# Required-Start: $syslog $time $remote_fs +# Required-Stop: $syslog $time $remote_fs +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Deferred execution scheduler +# Description: Debian init script for the atd deferred executions +# scheduler +### END INIT INFO +# +# Author: Ryan Murray +# + +PATH=/bin:/usr/bin:/sbin:/usr/sbin +DAEMON=/usr/sbin/atd +PIDFILE=/var/run/atd.pid + +test -x $DAEMON || exit 0 + +. /lib/lsb/init-functions + +case "$1" in + start) + log_daemon_msg "Starting deferred execution scheduler" "atd" + start_daemon -p $PIDFILE $DAEMON + log_end_msg $? + ;; + stop) + log_daemon_msg "Stopping deferred execution scheduler" "atd" + killproc -p $PIDFILE $DAEMON + log_end_msg $? + ;; + force-reload|restart) + $0 stop + $0 start + ;; + status) + status_of_proc -p $PIDFILE $DAEMON atd && exit 0 || exit $? + ;; + *) + echo "Usage: /etc/init.d/atd {start|stop|restart|force-reload|status}" + exit 1 + ;; +esac + +exit 0 diff --git a/lintianrc b/lintianrc new file mode 100644 index 00000000..76f781e4 --- /dev/null +++ b/lintianrc @@ -0,0 +1,51 @@ +# /etc/lintianrc -- Lintian configuration file +# +# Note, that Lintian has reasonable default values for all variables +# specified below. Thus, you don't have to change this file unless you +# want something special. +# +# Also note, that this file uses a special syntax: +# Empty lines are allowed, comments are introduced by a hash sign (#). +# All other lines must have the format +# VAR=text +# or +# VAR="text" +# It is allowed to use `~' and `$HOME' in the variables, but not other +# shell/environment variables. + +# Enable info tags by default (--display info) +#display-info = yes + +# Limit the number of parallel unpacking jobs to X (--jobs) +#jobs = 8 + +# Enable pedantic tags by default (--pedantic) +#pedantic = yes + +# Enable experimental tags by default (--display-experimental) +#display-experimental = yes + +# Enable colored output for terminal output (--color) +#color = auto + +# Show overridden tags (--show-overrides) +#show-overrides = yes + +# Ignore all overrides (--no-override) +#override = no + +# Verbose output by default (--verbose) +#verbose = yes + +# Quiet by default (--quiet) +#quiet = yes + +# Use a different directory for temporary files - useful if /tmp is a +# tmpfs with "limited" capacity. +#TMPDIR="/var/tmp" + +# Suppress the listed tags (--suppress-tags) +#suppress-tags = debian-watch-does-not-check-gpg-signature + +# Specify "tag per package" display limit (--tag-display-limit) +#tag-display-limit = 42 diff --git a/pam.d/atd b/pam.d/atd new file mode 100644 index 00000000..3674c0ac --- /dev/null +++ b/pam.d/atd @@ -0,0 +1,10 @@ +# +# The PAM configuration file for the at daemon +# + +@include common-auth +@include common-account +session required pam_loginuid.so +@include common-session-noninteractive +session required pam_limits.so +auth required pam_env.so user_readenv=1 diff --git a/perl/XML/SAX/ParserDetails.ini b/perl/XML/SAX/ParserDetails.ini new file mode 100644 index 00000000..71033637 --- /dev/null +++ b/perl/XML/SAX/ParserDetails.ini @@ -0,0 +1,18 @@ +[XML::SAX::PurePerl] +http://xml.org/sax/features/namespaces = 1 + + +[XML::LibXML::SAX] +http://xml.org/sax/features/namespaces = 1 + + +[XML::LibXML::SAX::Parser] +http://xml.org/sax/features/namespaces = 1 + + +[XML::SAX::Expat] +http://xml.org/sax/features/external-general-entities = 1 +http://xml.org/sax/features/namespaces = 1 +http://xml.org/sax/features/external-parameter-entities = 1 + + diff --git a/rc0.d/K01atd b/rc0.d/K01atd new file mode 120000 index 00000000..8cd72487 --- /dev/null +++ b/rc0.d/K01atd @@ -0,0 +1 @@ +../init.d/atd \ No newline at end of file diff --git a/rc1.d/K01atd b/rc1.d/K01atd new file mode 120000 index 00000000..8cd72487 --- /dev/null +++ b/rc1.d/K01atd @@ -0,0 +1 @@ +../init.d/atd \ No newline at end of file diff --git a/rc2.d/S01atd b/rc2.d/S01atd new file mode 120000 index 00000000..8cd72487 --- /dev/null +++ b/rc2.d/S01atd @@ -0,0 +1 @@ +../init.d/atd \ No newline at end of file diff --git a/rc3.d/S01atd b/rc3.d/S01atd new file mode 120000 index 00000000..8cd72487 --- /dev/null +++ b/rc3.d/S01atd @@ -0,0 +1 @@ +../init.d/atd \ No newline at end of file diff --git a/rc4.d/S01atd b/rc4.d/S01atd new file mode 120000 index 00000000..8cd72487 --- /dev/null +++ b/rc4.d/S01atd @@ -0,0 +1 @@ +../init.d/atd \ No newline at end of file diff --git a/rc5.d/S01atd b/rc5.d/S01atd new file mode 120000 index 00000000..8cd72487 --- /dev/null +++ b/rc5.d/S01atd @@ -0,0 +1 @@ +../init.d/atd \ No newline at end of file diff --git a/rc6.d/K01atd b/rc6.d/K01atd new file mode 120000 index 00000000..8cd72487 --- /dev/null +++ b/rc6.d/K01atd @@ -0,0 +1 @@ +../init.d/atd \ No newline at end of file diff --git a/systemd/system/multi-user.target.wants/atd.service b/systemd/system/multi-user.target.wants/atd.service new file mode 120000 index 00000000..e225a48b --- /dev/null +++ b/systemd/system/multi-user.target.wants/atd.service @@ -0,0 +1 @@ +/lib/systemd/system/atd.service \ No newline at end of file